Open AccessPeer ReviewedPublished Monthly Since 2007 Vol. 19, Issue 12 · November 2026Media Kitinfo@guident.net

Segmented Arch Mechanics or Continuous Arch Mechanics: Which Is Better

  • Dr. Divya S. Dr. Arun S. Urala Dr. Siddharth MehtaAssistent Professor
Guident · Volume 9, Issue 12 (November 2016)Published November 20164 min read2 figures

Abstract

This article reviews the comparison between segmented arch mechanics and continuous arch mechanics.

INTRODUCTION


Biomechanics is the application of mechanical principles to living organisms, such as humans, animals, plants and the functional basic units of life, the cells. As force is the medicine in orthodontics we need to understand the basic laws of mechanics and its effects on living cells.
Today's orthodontist needs a working knowledge of both segmented and continuous arch mechanics. There are indications for both, and therefore a practitioner should not be limited to one or the other. Following are the various criteria which differentiate between segmented and continuous arch mechanics.

  1. Definition,

  2. Case selection criteria,
  3. Possibilities,
  4. Treatment time sequencing,
  5. Advantages and disadvantages,
  6. Pearls and pitfalls.

1. Definition1

Segmented arch mechanics

Continuous arch mechanics

- Orthodontic mechanotherapy in which not all teeth within an arch are included in the same arch wire, but rather anchorage and active segments are created by consolidating teeth together using wire segments.

-It consists of an archwire that engages only few teeth within an arch (only four incisors or only the teeth in a posterior dental segment)

-Orthodontic mechanotherapy utilizing continuous arch wires in the entire dental arch. (As opposed to segments of arch wires encompassing segments of teeth)

-It consists of an archwire that engages, through crown attachments (brackets and tubes), many or all of the erupted teeth in the maxillary or mandibular dental arch. (molar to molar)

Clinical figure

2. Case selection criteria

Continuous arch mechanics

Segmented arch mechanics

Generalized spacing

+++

Mild crowding(Non Extraction)

+++

Crowding(Extraction)

+++

Surgical cases

(Decompensations)

+++

Open bite cases

Moderate to severe crowding (Extraction)

+++

Differential anchorage desired

+++

Severe canine or premolar root angulations

+++

Asymmetric cases

+++

Multiple missing teeth

++

Periodontal health compromised

++

Desired to perform multiple stages of treatment

+

3. Possibilities of segmented arch mechanics and continuous arch mechanics:

  • Deep bite correction
  • Open bite correction
  • Space closure: En masse retraction


Canine retraction

Deep bite correction

Segmented arch mechanics11

Continuous arch mechanics8

Deep bite can be corrected by

intrusion of the incisors with intrusion arches.

  • Rickets utility arch ( 2x4 appliance

  • Continuous intrusion arch

  • Burstone’s three piece intrusion utility arch

Deep bite can be corrected by using

  • Bite plates

  • Reverse curve of spee

  • Step bend in the arch wire

Open bite correction

Segmented arch mechanics12

Continuous arch mechanics8

Extrusion arches

  • The extrusion arch is the reverse of the intrusion arch.

  • Used to correct upper and lower occlusal planes that diverge anterior to the first premolars.

  1. Vertical elastics

  2. Multiloop Edgewise Arch Wire.

  • Correcting the inclination of the occlusal planes.

  • Aligning the maxillary incisors relative to the lip line.

  • Uprighting the axial inclinations of the posterior teeth.

Space closure mechanics

Segmented arch mechanics13,14,15

Continuous arch mechanics8

En masse retraction:

  1. Four Incisors: PG spring, Utility arch, Omega loop

  2. Six anteriors: T loop, opus loop

Simultaneous intrusion and retraction:

  1. Four incisors: K SIR loop

  2. Six anteriors: Burstone’s three piece intrusion arch, Rickets retraction and intrusion utility arch

Single Canine retraction:

Poul Gjessing spring, Burstone’s T loop

  • E chain

  • Sliding mechanics with light forces:

Active tie backs

Passive tie backs: Elastomeric modules, Nickel titanium coil springs

4.Treatment stages7

Segmented Arch Mechanics

Continuous Arch Mechanics

Retraction of canine

Leveling and Aligning

Retraction of incisor and Intrusion

Retraction of canine

Align and Level

Retraction of incisor

Coordination, Detailing and Finishing

Coordination, Detailing and Finishing

5. Segmented arch mechanics5

Advantages

Disadvantages

  • One of the major advantages of segmented mechanics is that a known force system is delivered to teeth because there is no dissipation of force by friction.

  • Precise control over the anterior and posterior anchorage.

  • It is fail safe; the tooth will move only to the limit to which the loop is activated.

  • Differential tooth movement is possible.

  • Retraction loops or springs offer more controlled tooth movement than continuous mechanics.

  • A good understanding of mechanics is required when using retraction loops or springs because minor errors in mechanics can result in major errors in tooth movement.

  • More wire bending skill and chair time is required as compared to friction mechanics.

  • Retraction loops may be uncomfortable to some patients, especially with less vestibular depth.

  • Can lead to gingival irritation because of the loops.

Continuous arch mechanics8

Advantages

Disadvantages

  • Complicated wire configuration is not required.

  • Initial wire placement is less time consuming.

  • Enhances patient comfort.

  • Confusion regarding the ideal force levels. There are no essential guidelines concerning the amount of force to be used during space closure.

  • Tendency for initial over activation of elastic and spring forces, causing initial tipping and inadequate rebound time for uprighting.

  • Limited ability to produce differential anchorage, optimal tooth movements or control for adverse responses in complex cases.

Clinical figure

CONCLUSION

To obtain optimal and efficient treatment, the clinician must select the ideal mechanical approach for the individual patient and the arch. A well-considered proactive selection of optimal biomechanics, careful appliance design, and implementation of strategies to minimize adverse tooth movements are likely to produce the most desirable and efficient results in any orthodontic patient.

REFERENCES

  1. 1. Glossary of Orthodontic Terms. Daskalogiannakis J, editor. 2000, Quintessence Books.
  2. 2. Contemporary Orthodontics. Profitt W.R, Fields W.H, Sarver D.M, editors. 4th edition 2007, Mosby Elsevier.
  3. 3. Biomechanics in Orthodontics. Marcotte M.R, editor. 1st edition 1990, B.C. Decker publisher.
  4. 4. Biomechanics in Clinical Orthodontics. Nanda R, editor. 1st edition 1997, Saunders.
  5. 5. Modern Edgewise mechanics and the segmented arch technique. Burstone C.J, Steenbergen E.V, Hanley K.J, editors. 1st edition 1995.
  6. 6. Biomechanics and Esthetic strategies in clinical orthodontics. Nanda R, editor. 1st edition 2005, Elsevier Saunders.
  7. 7. Current therapy in Orthodontics. Nanda R, Kapila S.D, editors. 1st edition 2010, Mosby Elsevier.
  8. 8. Systemized Orthodontic Treatment Mechanics – McLaughlin R.P, Bennett J.C, Trevisi H.J, editors. 2001, Mosby.
  9. 9. Burstone C.J. Rationale of the Segmented arch. Am J Orthod Dentofac Orthop 1962;48:805-822.
  10. 10. Burstone C.J. Deep overbite correction by intrusion. Am J Orthod Dentofac Orthop 1977;72:1-22.

Disclaimer from Guident

The views and opinions expressed in articles published in Guident are solely those of the authors and do not necessarily reflect the views of the editors, the editorial board or the publisher, Ivory India. Guident does not endorse any product, technique or treatment described. Clinical content is intended for qualified dental and medical professionals and is not a substitute for individual clinical judgement. Guident, its editors and the publisher accept no liability for any consequence arising from the use of information published in the journal.

How to cite this article

Dr. Divya S. Dr. Arun S. Urala Dr. Siddharth Mehta. Segmented Arch Mechanics or Continuous Arch Mechanics: Which Is Better. Guident. 2016 Nov;9(12). Available from: https://ivoryindia.in/articles/orthodontics/segmented-arch-mechanics-or-continuous-arch-mechanics-which-is-better.html

Related articles

More in Orthodontics

All 135 articles
Vol. 10, Issue 1 · December 2016

Surgical Correction of Skeletal Class II

A 25 year old femalereported to the department with the chief complaint of deviated mandible to the left side. She gave history of trauma due to fall when she was 5 months old and underwent…

Dr. Suraj Prasad Sinha

Call for papers

Publish your clinical work in Guident

Original research, case reports and review articles are welcomed from clinicians and researchers worldwide. Every submission is assessed by the editorial board.