Open AccessPeer ReviewedPublished Monthly Since 2007 Vol. 19, Issue 12 · November 2026Media Kitinfo@guident.net

Maxillary Obturator : A Review

  • Dr. Indresh RajawatAssociate Professor
  • Dr. Shruti Sharma GroverAssociate Professor
  • Dr. Anand KumarJunior Resident
Guident · Volume 16, Issue 2 (January 2023)Published January 20239 min read

INTRODUCTION

The most common of all intraoral defects are in the maxilla, in the form of an opening into the antrum and nasopharynx. Defects in the maxilla may be divided into defects resulting from congenital malformations and acquired defects resulting from surgery for oral neoplasms. The opening produced maybe quite small or it may include any portion of the hard and soft palate, the alveolar ridges, and the floor of the nasal cavity. Postsurgical maxillary defects predispose the patient to hypernasal speech, leakage of fluid into the nasal cavity, and impaired masticator function.1 Absence or loss of some or all of the soft palate and/or hard palate results in insuficient structure or altered function of the remaining structure. Defects can cause disruption of articulation and airflow during speech production and nasal reflux during deglutition.

DEFINITIONS

An obturator is a prosthesis which is fabricated for the patients with the palatal defects in the form of cleft lip and palate, oroantral fistula, or surgical resection after removable of pathology-like tumor or cancer.

Chalian in 1971 described an obturator as a disc or plate, natural or artificial which closes an opening or defect of the maxilla as a result of cleft palate or partial or total removal of the maxilla for a tumor mass.

According to Glossary of Prosthodontic Terms, obturator is a prosthesis used to close a congenital or acquired tissue opening primarily of the hard palate and/or contiguous alveolar/soft tissue structures

Ideal requirements for maxillary obturator

  1. Help the patient to carry out natural functions such as phonation, deglutition, and mastication
  2. Should exhibit life-like appearance to aid function
  3. Design of the prosthesis should be such that it is easily and swiftly placed and held in position both comfortably and securely
  4. Prosthesis should be durable for a reasonable period of time, retain its polish and finish
  5. Should be easy to clean so as to maintain hygiene

THE INDICATIONS FOR THE USE OF AN OBTURATOR ARE:

  • To serve as a temporary prosthesis during the period of surgical correction
  • To restore the esthetic appearance of the patient rapidly for social contact
  • When surgical primary closure is contraindicated
  • When the age of the patient contraindicates surgery
  • When the size and extent of the deformity contraindicates surgery
  • When the local avascular condition of the tissues contraindicates surgery
  • When the patient is susceptible to recurrence of the original lesion which produced the deformity.

OBTURATORS FOR ACQUIRED DEFECTS OF PALATE

Almost all acquired palatal defects are precipitated by the resection of neoplasms of the palate and paranasal sinuses. The extent of the resection is dependent on the size, location, and potential behavior of the tumor.2

Prosthodontic therapy for patients with acquired surgical defects of the maxilla can be divided into three phases of treatment with each phase having different objectives.2,3

THE SURGICAL OBTURATOR

It is a base plate appliance which is constructed from the preoperative impression cast and inserted at the timeof resection of the maxilla in the operating room. The surgical obturator provides a matrix on which the surgical packing can be placed. It maintains the packing in the proper relationship, thus ensuring close adaptation of the skin graft. It also reduces oral contamination of the wound during the immediate postsurgical period and may thus reduce the incidence of local infection, and the nasogastric tube maybe removed at an earlier date.

THE TEMPORARY OBTURATOR

The temporary obturator is constructed from the postsurgical impression cast which has an artificial palate and artificial ridge and generally has no teeth. The closed bulb extending into the defect area is hollow. The patient is usually seen every two weeks becau se of the rapid soft tissue changes that occur within the defect during the organization and healing of the wound. The new lining material is placed or changed. It is best to remove the entire old interim lining material because of porosity, leading to bacterial contamination and precipitation of undesirable odors and mucosal irritations. The periodic addition of interim lining material increases the bulk and weight of the obturator and this temporary material may become rough and unhygienic.

THE DEFINITIVE OBTURATOR

A definitive obturator is not indicated until the surgical site is healed and dimensionally stable and the patient is prepared physically and emotionally for the restorative care that maybe necessary. Changes associated with healing and remodeling will continue to occur in the border areas of the defect for at least one year. Dimensional changes are primarily related to the peripheral soft tissues rather than to bony support areas.1,2,4

CLASSIFICATION OF OBTURATOR

Obturator may be classified

1. According to origin of the discrepancy

a. For congenital defect

i. To close the opening of hard palate, a simple base plate type of palatal plate helps to correct the swallowing, feeding, and speech

ii. An obturator with a tail, consisting of speech appliance or speech aid prosthesis, which restores soft and hard palate defects and a velopharyngeal extensions that correct the speech

iii. An overlay denture or a superimposed denture.

b. For acquired defect

i. Immediate temporary obturator or surgical obturator is a base plate type of prosthesis which is constructed from the preoperative active impression cast and inserted at the time of surgery, i.e. resection of the maxilla in the operating room

ii. Interim obturator, temporary obturator, treatment obturator, or transitional obturator is constructed from the postsurgical master cast

iii. Permanent obturator or definitive obturator.

2. According to location of the defect

a. Lateral or buccal obturator: Closes a defect on the labial or buccal ridge areas

b. Alveolar obturator: Closes opening on the alveolar ridge, either on the anterior or the posterior side of the upper jaw

c. Hard palate obturator: Closes opening continued within the anatomical limits of the hard palate whereas soft palate obturator closes the opening on the soft palate.

d. Soft palate obturator: Closes the opening on the so the soft palate.

e. Palatal lift prosthesis or obturator: Used to raisethe soft palate to the level of the hard palate. Whenpalatopharyngeal incompetence is encountered,rehabilitative efforts are designed to elevate thesoft palate. This elevation places the junction ofthe middle and posterior third of the soft palate inclose proximity to the posterior to the pharyngealwall creating a muscular seal that prevents nasalregurgitation of fluid and food during deglutition.The prosthesis also prevents the escape of air intothe nose when speaking.5,6

f. Pharyngeal obturator or speech aid prosthesis: It isused in palatopharyngeal insufficiency. This type of prosthesis extends beyond the residual soft palateto create separation between the oropharynx andnasopharynx. Obturator is designed to close the opening between the residual hard and/or soft palate and the pharynx insuficciency. It provides a fixed structure against which the pharyngeal muscles can function to affect palatopharyngeal closure. They establish contact with the musculature comprising the lateral and posterior pharyngeal walls and the soft palate and involve the most difficult functional requirements.7

3. According to the type of obturator attachment to the basic maxillary prosthesis

a. Fixed: Fixed type is stationary and directed toward the Passavant’s pad. It depends on the forward movement of the pharynx to effect closure. This obturator is generally preferred to hinge and meatus type as it is relatively efficient. Fixed type will not impede the residual function and also will not compromise the integrity of resting tissues

b. Hinged: Hinged type is connected to the main maxillary prosthesis by means of a hinge. Its bulk is located along the cleft edges and supposedly serves an anatomic purpose, in that, it moves up and back, supported by the soft palate edges, as does the normal soft palate to affect velopharyngeal closure

c. Meatus: Meatus type of obturator prosthesis extends obliquely upward from the hard soft palate junction to occlude against the turbinate and superior aspect of nasal cavity up to the nasal meatus. It separates the oral and the nasal cavities. It is a speech aid prosthesis designed to close the posterior nasal conches through a vertical extension from the distal aspect of the maxillary prosthesis. This is indicated when entire soft palate has been lost. It is most applicable to the fully edentulous patient who has undergone a total soft palate resection.8,9

d. Detachable obturator: The detachable type of obturator is one, in which the maxillary prosthesis and obturator parts are held together by some attachment. The patient can detach the parts for the purpose of insertion and removal, cleaning, and can unite them in the mouth. It is used in patients with restricted opening

e. Magnetically retained obturator: Two portions are connected to each other with the magnets. Magnetsare placed as laterally and posteriorly as possible to provide maximum amount of leverage in the denture and retention that is available

f. Implant retained obturator: Implant is more commonly used in the anterior maxillary segment as the bone loss in the anterior segment is approximately threefold more than the posterior segment placement of implant at the time of surgery due to the high rate of recurrence rate and morbidity.10

4. According to the physiologic movement of oral, nasal, and pharyngeal tissues adjacent to or functioning againstthe obturator

a. Static obturator: This obturator covers defects in the area from the lips to the junction of the hard and the soft palates and are essentially covering prostheses

b. Functional obturator: This obturator provides closure in the soft palate and pharyngeal areas and providessurfaces against which movable tissue function. A functional obturator is more difficult to constructsince it must maintain contact during muscularactivity and should not interfere with it.

5. Mohamed Aramany in 1978 classified obturators for maxillectomy patients who are partially edentulous intoseven groups. It takes into consideration only the hardpalate defects.11

a. Class I: Resection or defect is performed along the midline of the maxilla; teeth are maintained on oneside of the arch. It is the most frequent maxillary defect

b. Class II: Defect is unilateral, retaining the anterior teeth on the contralateral side

c. Class III: Palatal defect occurs in the central portion of the hard palate and may involve part of the soft palate. The surgery does not involve the remaining teeth

d. Class IV: Defect crosses the midline and involves both sides of the maxilla. There are few teeth remaining which lie in a straight line. This may create a unique design problem similar to the unilateral design of conventional removable partial dentures

e. Class V: Surgical defect is bilateral and lies posterior to the remaining abutment teeth

f. Class VI: Defect occurs mostly in trauma and the defect lies anterior to the bilaterally standing abutments. Surgical intervention of anterior mid palatal pathology can cause such type of defects

g. Class VII: This situation is similar to Kennedy Class II, but the defect is small unilaterally posterior to the standing abutments. This situation usually arises as a result of minor surgery for removal of pathology or can occur as squeal of multiple extractions in the posterior regions.

REFERENCES

  1. Chalian VA, Drane JB, Standish SM. Maxillofacial Prosthetics. Baltimore: The Williams and Wilkins Co.; 1971
  2. Beumer III, Curtis TA, Firtell DN. St Louis, Toronto, London: The CV. Mosby Co; 1979. Maxillofacial rehabilitation. Prosthodontic and surgical considerations; pp. 188–243. [Google Scholar]
  3. Wiens JP. Acquired maxillofacial defects from motor vehicle accidents: Statistics and prosthodontic considerations. J Prosthet Dent. 1990;63:172–81. [PubMed] [Google Scholar]
  4. Zarb GA. The maxillary resection and its prosthetic replacement. J Prosthet Dent. 1967;18:265. [PubMed] [Google Scholar]
  5. Schaefer K, Taylor TD. Palatal lift prosthesis first described by Gibbons and Bloomer in 1958. Clinical application of palatal lift. Clinical Maxillofacial Prosthetics. 1st ed., Ch. 9. Chicago: Quintessence Publication Co, Inc.; 2000. p. 133.
  6. Lavelle W, Hardy J. For treatment of palate?pharyngeal incompetence: Palatal lift prosthesis. J Prosthet Dent 1979;42:308.
  7. Eckert S, Desjardins R, Taylor T. Clinical Management of the Soft Palate Defect. Ch. 8. Chicago: Quintessence Publication Co, Inc.; 2000. p. 125.
  8. Thomas T, Ronald D. Construction of the meatus type obturator: Its advantages and disadvantages. J Prosthet Dent 1983;16:279.
  9. Sharry JJ. The meatus obturator in cleft palate prosthesis. Oral Surg Oral Med Oral Pathol 1954;7:852-5.
  10. Gitto CA, Plata WG, Schaaf NG. Evaluation of the peri?implant epithelial tissue of percutaneous implant abutments supporting maxillofacial prostheses. Int J Oral Maxillofac Implants 1994;9:197-206.12
  11. Aramany MA. Basic principles of obturator design for partially edentulous patients. Part I: Classification. J Prosthet Dent 1978;40:554?7

Disclaimer from Guident

The views and opinions expressed in articles published in Guident are solely those of the authors and do not necessarily reflect the views of the editors, the editorial board or the publisher, Ivory India. Guident does not endorse any product, technique or treatment described. Clinical content is intended for qualified dental and medical professionals and is not a substitute for individual clinical judgement. Guident, its editors and the publisher accept no liability for any consequence arising from the use of information published in the journal.

How to cite this article

Dr. Indresh Rajawat, Dr. Shruti Sharma Grover, Dr. Anand Kumar. Maxillary Obturator : A Review. Guident. 2023 Jan;16(2). Available from: https://ivoryindia.in/articles/prosthodontics/maxillary-obturator-a-review.html

Related articles

More in Prosthodontics

All 386 articles
Vol. 16, Issue 2 · January 2023

The Time to Go Digital Is Now

The field of science and technology is ever changing and the scientific knowledge of Prosthodontics is no exception. As a result of continual advancements in technology, new methods of…

Dr. P R Vinutna

Call for papers

Publish your clinical work in Guident

Original research, case reports and review articles are welcomed from clinicians and researchers worldwide. Every submission is assessed by the editorial board.