Effect of Twin Block Appliance on Facial Height- a Cephalometric Study
Post Graduate Institute of Dental Sciences, Rohtak
ABSTRACT
This retrospective cephalometric study compares the facial heights produced in 10 patients treated with twin block appliance in the department of Orthodontics, PGIDS, Rohtak. The average age for the twin block appliance therapy in patients was 11-13 years with a definite inclusion and exclusion criteria. The total treatment with twin block appliance was 10-12 months inclusive of active and retentive phase. At the end of the retentive phase the post treatment cephalometric facial height were measured and compared with the pre treatment cephalometric facial height and it was found to be statistically significant.
Kwy Word:twin block, cephalometrics, facial height.
INTRODUCTION
Functional appliance therapy has become an increasingly popular method of correcting class 11 malocclusion, with appliances such as bionator, frankel 2, activator, the fixed and removable types of herbst appliance1. Another functional appliance system that has shown increased use during the last decade is the twin block appliance. The twin block appliance was developed by William .J. Clark of fife, Scotland, for use in the correction of class 11 malocclusion characterized in part by mandibular skeletal retrusion.2
Lund and Sandler3,
conducted a prospective clinical trial in which they compared patients treated with twin block appliance with control sample and it was found that the treated group demonstrated an increase in the mandibular length with slight inhibition of forward maxillary growth. The upper molars were distalized in the twin block group, some proclination of lower incisors was there and lingual tipping of upper incisors was noted as well.
Very few studies had compared the facial height facial heights in the pretreatment and post treatment twin block patients. Accordingly the purpose of the present study is to compare the facial heights in the pre treatment and post treatment group
AIMS AND OBJECTIVES
- The present study was conducted with the aim and objective to compare the facial heights in the pre and post treatment patients treated with the twin block appliance.
- To compare the jarabak ratio in the pre and the post treatment groups.
MATERIAL AND METHOD
The cephalometric records of 10 patients before and after the completion of twin block therapy treated by me in the department of Orthodontics PGIDS, Rohtak were used for the study . The patients who were treated with the twin block therapy had
Inclusion criteria:
- Skeletal class 11 molar relationship (ANB > 4 degrees ) .
- Mandibular retrognathy ( SNB < 78 degrees ) .
- Overjet > 5mm .
- SN-GoGn – (30-35 degrees) .
- Minimum crowding in the dental arches.
- Bilateral class 11 molar and canine relationship.
- Patient with CVMI 2 or CVMI 3
EXCLUSION CRITERIA
- No history of orthodontic treatment
- Congenitally missing or extracted permanent teeth ( except third molars )
- Posterior cross bites
- Severe facial asymmetries.
- Systemic diseases that may affect orthodontic treatment results.
All the patients were given standard twin block appliance and the patients had undergone active phase for around 6-8 months followed by a retentive phase of 2-3 months. All the patients had class 1 or super class 1 molar relationship at the end of twin block phase of treatment
For those patients undergoing twin block treatment with mild to moderate overjets at the beginning of treatment, the appliances were constructed from bite registrations taken with the incisors in an end to end position. In cases where pretreatment over jet exceeded 6 to 7 mm, the bite registration was done step wise. The bite registration was allowd for 5-7 mm of vertical opening in the regions of posterior bite blocks for control vertical development of molars and premolars through selective removal of acrylic during treatment. All patients involved in the study were asked to wear the appliance 24 hours a day. After completion of the retentive phase that was nearly after 10-12 months , the pre treatment and the post treatment cephalogram were taken and tracings were done to calculate the linear measurements.
OBSERVATIONS AND RESULTS
Showing comparison of PFH in pretreatment vs. post-treatment
|
Pre PFH (n=10) |
Post PFH (n=10) |
Statistical significance |
|
70.9±6.41 |
75.9±6.48 |
<0.01 significant |
Showing comparison of AFH in pretreatment vs. post-treatment
|
Pre AFH (n=10) |
Post AFH (n=10) |
Statistical significance |
|
103.6±5.44 |
107.65±4.21 |
<0.05 significant |
Showing comparison of ratio in pretreatment vs. post-treatment
|
Pre AFH (n=10) |
Post AFH (n=10) |
Statistical significance |
|
68.41±4.81 |
70.08±4.97 |
<0.01 significant |
Showing sexwise comparison of various parameters in pretreat. vs. post-treat.
| Male (n=6) | Female (n=4) | Statistical significance | |
| Age | 12.5±0.836 | 12.5±0.577 | >0.05 N.S. |
| Pre PFH | 71.16±6.14 | 70.5±7.76 | >0.05 N.S. |
| Post PFH | 78.16±6.40 | 72.5±5.68 | >0.05 N.S. |
| Pre AFH | 102.16±5.03 | 105.75±6.02 | >0.05 N.S. |
| Post AFH | 108.91±2.49 | 105.75±5.90 | >0.05 N.S. |
| Pre Ratio | 69.66±5.25 | 66.54±3.94 | >0.05 N.S. |
| Post ratio | 71.74±5.44 | 67.55±3.25 | >0.05 N.S. |
DISCUSSION
Control of the vertical dimension is one of the proposed benefits of the twin block appliance . It is believed that the acrylic bite blocks either can inhibit molar eruption in patients for whom an increase in facial height is undesirable or can be modified to allow posterior dental eruption in situations when increasing facial height is primary goal of treatment. Indeed Clark has stressed selective removal of acrylic to allow an increase in the vertical dimension as an important component of twin block therapy.
In the present study all patients of class 11 who had short anterior facial heights were taken and the posterior acrylic bite blocks were trimmed during treatment in an attempt to increase the vertical dimension. There was an significant increase in the anterior facial height .This was similar to the results of the study done by Mc.Namara et al .
The anterior facial height and posterior facial height increased by 3 mm and 3.5 mm respectively . Significant increase were observed in the jarabak ratio which is the posterior facial height divided by anterior facial height percentage4.
REFRENCES
- Linda Ratner Toth Treatment effects produced by twin block appliance and the FR-2 appliance compared with untreated class 11 Am J Orthod Dentofacial Orthop 1999; 116:597-609
- Asli Baysal, Tancan Uysal : Dento skeletal effects of twin blocl and herbst appliances in patients with class 11 division 1 mandibular retrognathy Europ. J of Orthod. 2013 :22 (3):207-210
- Mills CM, McCulloch KJ Treatment effects of the twin block appliance: a cephalometric study. Am J Orthod Dentofacial Orthop. 1998;114 (1):15-24.
- Antanas Sidlauskas Clinical Effectiveness of the Twin Block Appliance in the treatment of Class 11 division 1 malocclusion.
- Stomatologija, Baltic Dental and Maxillofacial Journal, 7:7-10, 2005
More references are available on request.
Disclaimer from Guident
The views and opinions expressed in articles published in Guident are solely those of the authors and do not necessarily reflect the views of the editors, the editorial board or the publisher, Ivory India. Guident does not endorse any product, technique or treatment described. Clinical content is intended for qualified dental and medical professionals and is not a substitute for individual clinical judgement. Guident, its editors and the publisher accept no liability for any consequence arising from the use of information published in the journal.
How to cite this article
Dr. Manisha Kamal, Dr. Ajit Rohilla, Dr. Mahesh Goel Department of Orthodontics & Dentofacial Orthopedics. Effect of Twin Block Appliance on Facial Height- a Cephalometric Study. Guident. 2015 Jun;8(7). Available from: https://ivoryindia.in/articles/research/effect-of-twin-block-appliance-on-facial-height-a-cephalometric-study.html














