Corelation Between Teeth Exposure and Smile Arcs - a Photographic Analysis
Department of Prosthodontics, A.B.Shetty Memorial Institute of Dental Sciences, NITTE University Deralakatte, Mangalore, India
ABSTRACT
Ensuring optimal smile creation and beautiful smile esthetics is the key to successful prosthodontic restorations.From a dental point of view, an esthetically attractive smile is a harmonious entity of oral components in which the lip - tooth relationships are crucial factors.The "smile line" is commonly used as a parameter to evaluate and categorize a person's smile.This study assesses the prevalence of various smile arcs and the amount of tooth exposure in each of them, in the south coastal population of India.
KEYWORDS: Smile arcs, Posed smile, Lip-Tooth Relationship
INTRODUCTION
Smile is one of the most important facial expressions and is essential in expressing friendliness, agreement and appreciation. From a dental point of view, an esthetically attractive smile is a harmonious entity of oral components in which the lip - tooth relationships are crucial factors. Ensuring optimal smile creation and beautiful smile esthetics is the key to successful prosthodontic rehabilitations.
Smile can be classified as social (posed) which is not accompanied by emotion, and is voluntary, unstrained and static facial expression; and enjoyment (unposed), which is accompanied by emotion, and is involuntary and often more animated. The posed smile is used routinely when evaluating facial esthetics and smile characteristics because the posed smile is reproducible and can be generated on command.1
The "smile line" is commonly used as a parameter to evaluate and categorize a person's smile.2 Smile line is a curve that passes through the incisal margins of the maxillary central incisors and canines making an arc. When the incisal margins of the maxillary central incisors appear below the canine cusps, the smile arc is said to be convex.(fig 1) When the canine cusps are more occlusal than the incisal margin of the maxillary central incisors, the smile arc is said to be concave (Fig 2) and when they lie in a straight line, the smile arc is said to be straight.
Findings show that an average smile exhibits approximately the full length of the maxillary anterior teeth, has the incisal curve of the teeth parallel to the inner curvature of the lower lip, has the incisal curve of the maxillary anterior teeth touching slightly or missing slightly the lower lip, and displays the six upper anterior teeth and premolars.3
Exposure is a term used to quantify the dental structure or gingiva that appears during a smile and the amount of dental and gingival exposure during speech and smile varies from person to person.
This study assesses the prevalence of various smile arcs and the amount of tooth exposure in each of them, in the south coastal population of India.
MATERIALS AND CRITERIAS
The sample size of 30 subjects were taken from among the students of A.B.Shetty Memorial Institute of Dental Sciences, Mangalore, between the age group of 18 to 30 yrs.
Inclusion criteria was dentulous subjects with all teeth present in the esthetic zone in the maxillary and mandibular arch.
Exclusion criteria included subjects with any missing tooth in the esthetic zone, any prosthetic replacement, subjects undergoing or having undergone orthodontic treatment, those with facial hair masking the smile or did not show teeth when smiling and subjects having excessive anterior crowding.
Fig 1 : Convex Smile Arc
Fig 2 : Concave Smile Arc.
Fig 3 : Straight Smile
METHODOLOGY
A posed smile photograph of each of the 30 subjects was clicked using a digital camera by a single operator. The subjects were selected within the age group of 18-30 years.The study was explained to each participant and all agreed to participate in the study and informed consent was obtained.
Standardized photographic images were captured by using EOS 1100D digital SLR camera with a Canon EF 100 mm f/2.8L IS USM Macro lens (Canon, Inc., Lake Success, NY) at the fixed focal length of 1:3. The camera was positioned to photograph the smile from between an angle of 10 degrees above the Frankfurt horizontal plane to at the level of the FHP at 0 degrees4.
The participants were positioned at a standardised distance from the camera (focal length 1:3) and asked to tilt their head so that the Frankfort horizontal plane (from infraorbital notch to superior border of tragus) was parallel to the horizontal, with the floor as the reference plane.
Each subject was asked to repeat the word ‘chee’, ‘tee’ and asked to smile voluntarily (posed smile). A colour digital photograph was taken of each participant. At 1:3 focus, the picture frame comprises of only the mouth and teeth of the smiling participant. The pictures were shot in daylight and no external light source was used
After all the participants had been photographed, the images were entered into image processing software (Adobe Photoshop 7.0. , Adobe Systems, Inc., San Jose, California) that allowed the photographs to be cropped in a calibrated manner to standardise the digital photographs of each participant.
The smile arc of each subject was analysed by drawing a line from the cusp tip of one canine to the other and the incisal margin of the maxillary central incisor was marked.
The results were then calculated and statistically analysed by using students ‘t’ test.
RESULTS
The Average Tooth Exposure :
Table 1:Average measurements and mean of the amount of tooth exposure in maxillary right and left Central incisor, lateral incisor and Canine in millimetres in all participants
On an average, the amount of tooth exposure of central incisors in a convex type of smile was found to be 94.2mm, in a straight type smile was found to be 68.7 and in a concave type of smile was 48.7mm. (Graph 1)
GRAPH 1
Average tooth exposure of lateral incisor in a convex type smile was found to be 84mm, in a straight type smile was found to be 60mm and in a concave type smile was found to be 45.7mm. (Graph 2)
GRAPH 2
Average tooth exposure of canine in a convex type of smile is 75mm, in a straight type of smile is 60mm and in a concave type of smile is 44mm. (Graph 3)
GRAPH 3
The prevalence of the smile arc was also assessed. 42.8% of the total sample size evaluated had convex smile arc. 32.2% had straight smile arc and 25% had concave smile arc. (Graph 4)
GRAPH 4
DISCUSSION
Optimal facial esthetics is one of the objectives in prosthodontic treatment and an important issue in modern society. Prosthodontic treatment permits individuals with dental imperfections to achieve improved dentofacial esthetics. Teeth length plays a role in facial contouring and hence should be taken into consideration during an esthetic makeover of a patient.
With the traditional photographic technique, a posed smile was considered adequate to obtain a reproducible diagnostic record. Social (posed) is voluntary, unstrained and static facial expression and reproducible while an unposed smile which is accompanied by emotion, is involuntary and animated. The posed smile is used while evaluating facial esthetics and smile characteristics because it can be generated on command.1
This considerably reduces the clinical chairside time without compromising on esthetics. In this study only the posed smile of the subjects has been considered.
The study revealed that the most common smile arc is the Convex Smile. 42.8% of the population was found to have convex smile arc. The least common being concave with only 25% of the population showing a concave smile arc. 32.2% of the population had straight smile. The amount of tooth exposure of the central and lateral incisors and the canine during smile was also measured.
Some of the strengths of this study are
- The photographs have been taken of a posed smile (repeatable) and the photographs have not been digitally altered.
- The measurements were made with the help of the Adobe Photoshop program which ensured its accuracy.
- The images captured using EOS 1100D digital SLR camera with a Canon EF 100 mm f/2.8L IS USM Macro lens (Canon, Inc., Lake Success, NY) at the fixed focal length of 1:3 which ensured its standardisation. Every photograph clicked was of 7.03 Megapixels and the document size of 677mm width by 451mm height was common for all the photographs. Within that reference framework, the tooth exposure for each smile type was measured. The measurement of tooth exposure in millimetres may not be the same as reality, but its accuracy in relative terms is accurate.
The limitation of this study is that the angle at which the photograph was captured and the parallelism to the Frankfort Horizontal plane cannot be ascertained as a tripod was not used. Since the measurements were made from the photographs of 7.03 Megapixels, it may not be the same as reality, but its accuracy in relative terms is correct. Hence although the values measured are much larger than reality, it is only a relative measurement.
CONCLUSION
Within the limitations of this study, the following conclusions were drawn. The most common smile arc is the convex smile arc and the maximum amount of tooth exposure is in a convex smile type.
Teeth length plays a role in facial contouring and hence should be taken into consideration during an esthetic makeover of a patient. In this day and age since esthetics holds paramount importance, the size, shape and the amount of teeth visible in the esthetic zone play a key role in the perception of beauty and the success of dental rehabilitation.
REFERENCES
- Havens DC, Mc Namara J A et al. Role of the posed smile in overall facial esthetics. Angle Orthod 2010;80:322–328.
- Ritter D, Gandini L et al. Analysis of the smile photograph. World J Orthod 2006;7:279-285
- Tjan AH, Miller GD. The JG. Some esthetic factors in a smile. J Prosthet Dent 1984;51:24-8.
- Kattadiyil M, Goodacre A et al. Esthetic smile preferences and the orientation of the maxillary occlusal plane. J of Prosthet Dent 2012;108:354-361
Disclaimer from Guident
The views and opinions expressed in articles published in Guident are solely those of the authors and do not necessarily reflect the views of the editors, the editorial board or the publisher, Ivory India. Guident does not endorse any product, technique or treatment described. Clinical content is intended for qualified dental and medical professionals and is not a substitute for individual clinical judgement. Guident, its editors and the publisher accept no liability for any consequence arising from the use of information published in the journal.
How to cite this article
Dr. Krishna Prasad, Dr. Anupama Prasad, Dr. Archana Ashok S.. Corelation Between Teeth Exposure and Smile Arcs - a Photographic Analysis. Guident. 2014 Apr;7(5). Available from: https://ivoryindia.in/articles/prosthodontics/corelation-between-teeth-exposure-and-smile-arcs-a-photographic-analysis.html
















