Factors Affecting Marginal Bone Loss
Department of Prosthodontics Thaimoogambigai Dental College And Hospital Maduravoyal, Chennai, India
INTRODUCTION
Dental implants are a proven modality for treating completely and partially edentulous patients.It has become increasingly possible to manage a broad range of clinical dilemmas with dental implants due to their high level of predictability and applicability for a variety of treatment options . The longevity of dental implants is highly dependent on integration between implant components and oral tissues, including hard and soft tissues .
Long-term clinical evaluation of dental implants and their superstructures is crucial to impart more information about causes of success and failure. While the track record of successful dental implant procedures is impressive, some patients do experience some complications. Potential problems include infection, insufficient bone mass, incorrect positioning, fractured implants, damage to surrounding tissue (including gums, nerves and blood vessels) and teeth, overloading, marginal bone loss around the implant and even reaction to anesthesia.
However, bone loss at the coronal portion of the implant is one of the crucial complications which represent a treat to implant longevity .Maintenance of crestal bone around dental implants is one of the critical factors that affect longevity and esthetic soft-tissue architecture .The purpose of this article is to review the various factors associated with the marginal bone loss and the techniques followed to minimize it.
MARGINAL BONE LOSS
Implants get attached to bone through a complex phenomenon of osseointegration. And this process occurs due to continuous modeling and remodeling of bone. During this modeling and remodeling of bone marginal bone loss takes place1.This loss begins at the neck of the implant and spreads to the first thread of the body of the implant or to the first contact between the bone and the rough surface of the implant2.
Marginal bone loss was first reported by Adellet al3. Progressive and continuous marginal bone loss can lead to failure of implants. Albrektsson et al stated that an average bone loss in the first year of loading should not be more than 1.5mm and there after it should occur at the rate of 0-0.2mm per year. Marginal bone loss exceeding this proposed rate can cause implant failure5.Other studies reported an average first year bone loss of 0.93mm, with a range of 0.4 to 1.6mm and mean loss of 0.1mm after first year of implant functioning3.
But there are many authors who argue and doubt that a firm measurement of marginal bone loss cannot be established and so it has been proposed that an implant is considered failed when marginal bone loss has reached upto apical 1/3 of the implant5. The exact cause of marginal bone loss is unknown, there are many hypotheses postulated in this regard, but none of them is widely accepted7. Finite element analysis (FEA) has shown that occlusal forces are distributed primarily to the crestal bone, rather that evenly throughout the surface area of implant3. Thus, it is hypothesized that occlusal trauma causes marginal bone loss.
There are few theories and risk factors explaining the causes for marginal bone loss:
1. SURGICAL TRAUMA
Heat generated at the time of drilling, elevation of the periosteal flap and excessive pressure at the crestal region during implant placement may contribute to implant bone loss during the healing period.
a. Periosteal reflection hypothesis: This theory states that, periosteal reflection affects crestal bone blood supply, causing osteoblast death on the surface of crestal bone due to trauma and lack of nutrition3. Wilderman et al5 reported that the mean horizontal bone loss after osseous surgery with periosteal elevation is approximately 0.8 mm, and the reparative potential is highly dependent upon the amount of cancellous bone (not cortical bone)underneath the cortical bone.
Even though crestal cells die due to trauma and lack of blood supply, the blood supply is reestablished once periosteum regenerates. New blood vessels also form in that region and trabecular bone beneath the surface is a constant source of blood supply which is maintained even after periosteal reflection3.Periosteal reflection would lead to generalized horizontal bone loss and not only at the implant site. And the bone loss would be visible immediately after 2ndstage surgery3, but during implant placement such generalized bone loss is not visible. Thus this theory does not seem to be the cause of marginal bone loss.
b. Implant osteotomy hypothesis:This theory states that heat produced due to implant preparation site at bone destroys bone cell, causing earlybone loss. Eriksson and Albrektsson6 reported that the critical temperature for implant site preparation was 47 degrees Celcius for one minute or 40 degrees Celsius forseven minutes. Matthews and Hirsch demonstrated that temperature elevation was influenced more by the force applied than drill speed7.
A devitalized zone of 1mm is created aroundthe implant and blood supply and cutting cones are necessary for remodeling of the bone. The crestal bone is more susceptible to bone loss as it has diminished blood supply and greater heat production3.If heat production due to site preparation would have been the cause, its effect would have been noticeable at the II stage surgery, implant failure after 4-6 months wouldhave been visible, and however, bone growth takes place.Therefore, this theory cannot be the primary reason for marginal bone loss3.
2. IMMUNE RESPONSE TO INFECTIONS
This theory states presence of bacteria around natural teeth and implants to be the primary reason of marginal bone loss. Literature and repeated studied have shown that bacteria is the cause of vertical bone loss around natural teeth. Occlusal trauma may accelerate the procedure but alone is not the cause of marginal boneloss8.There are two infections caused by poor oral hygiene around an implant, peri-mucositis, which is a reversible inflammatory reaction around functioning implants and peri-implantitis is inflammatory reactions with loss of bone support9.
The inflammatory process of peri-implant mucositis around an implant is quite similar to gingivitis around natural teeth. The difference in collagen fiber direction (parallel to the implant surface and perpendicular to toothsurface) and amount of vascular structure may explain the faster pattern of tissue destruction in peri-implant tissues than periodontal tissues10.
Shortly after implants are placed, glycoproteins from saliva adhere to exposed titanium surfaces with concomitant microbiological colonization11.Various studies have been done to compare the features of experimentally created peri-implantitis and periodontitis suggesting that clinical and radiographic signs of tissue destruction were more pronounced and the size of inflammatory cell infiltrate in the connective tissue was larger, approaching the crestal bone in peri-implantitis12.Marginal bone loss due to peri-implantitis falls in a range of 1% to 19%13.
Karoussis et al reported that patients with a history of chronic periodontitis had a higher incidence of peri-implantitis(28.6%) as compared with patients of no history of periodontitis (5.8%) 14.However, there has been no evidence that peri-implantitis induces crestal bone loss during healing and, in the first year of function, at a faster rate than following years.
Early crestal bone loss may result in an environment favorable for anaerobic bacterial growth, thus possibly contributing to more bone destruction in following years10.In the majority of implants however the bone loss is dramatically reduced after the first year of prosthesis loading. Therefore, peri-implantitis as the main causative factor for early implant bone loss may not be justified10.
3. BIOLOGICAL WIDTH HYPOTHESIS
Biological width is a natural phenomenon that exists with the natural tooth. Biological width refers to the height of the dento-gingival attachment apparatus around a normal tooth and is defined as the distance necessary for a healthy existence of bone and soft tissue from the most apical extent of a dental restoration. It has greater dimension in the posterior teeth as compared with theanterior10.The implants term biological width denotes the dimensions of periodontal and peri-implantsoft-tissue structures such as the gingival sulcus, the junctional epithelium, and the supra-crestal connective tissues15.
Berglundh et al16 observed 0.5 mm of bone loss below the implant abutment connection within 2 weeks afterstage 2 surgery in dogs. Lindheet al17 reported inflammatory connective tissue0.5 mm below the implant abutment connection.Makigusa18 on animal study showed that the biological width gets re-established after implant placement, As this occurs, circumferential bone loss typically occurs around the implant's coronal aspect up to the first implant thread.
Abrahamsson et al19 suggested that a certain width of the peri-implant mucosa is required to enable a proper epithelial-connective tissue attachment, and if this soft tissue dimension is not satisfied, bone resorption will occur to ensure proper establishment of attachment with appropriate biological width. Bone loss due to biological width adjustments occurs within 1 month of implant placement and is related to implant design and abutment-implant connection in relation to bone10.
Also, this concept does not explain why greater bone loss occurs in soft bones compared to dense bones, nor it explains higher implant failure rates in less quality bones after loading3. This is the reason for maintaining aminimum distance of 3 mm between two implants and platform switching in the esthetic reconstruction zone in order to obtain intact papillae and stable inter-implant bone20.
4. MICRO-GAP AND THE PLATFORM-SWITCHING CONCEPT
Many implant systems have abutments used with conventional implant types that are flush with the implant shoulder in the contact zone. This results in the formation of microcracks between the implant and the abutment10. Numerous studies have shown that bacterial contamination of the gap between the implant and the abutment adversely affects the stability of the peri-implant tissue10.
If above-average axial forces are exerted on the implant, a pumping effect may ensue (dependingon the positive internal/external connection atthe interface), which may then result in a flow of bacteria from the gap, causing the formation of inflammatory connective tissue in the region of the implant neck. The peak of inflammatory cells was found about 0.5mm coronal to the microgap and consisted primarily of neutrophillic polymorphonuclear leukocytes21.
Berglundh and Lindhe evaluated the micro-gap of the Branemark two-stage implant and found that inflamed connective tissue existed 0.5 mm above and below the abutment–implant connection,which resulted in 0.5 mm bone loss within two weeks after the abutment had been connected to the implant22.
Ericsson et al6 coined the term distance-sleeve associated infiltrated connective tissue to describe this phenomenon. They interpreted this to be a biological protective mechanism against the bacteria residing in the microcrack, explaining the plaque-independent bone loss of approximately 1mm during the first year.This bone loss may result in a reduction ofthe marginal bone level in both the vertical and the horizontal dimensions.
If the microcrack is located close to the bone, the creation of the biological width will occur at the expense of the bone. To create adequate space for the biologic soft tissue seal and attachment of the soft tissue to the stable implant top, crestal bone remodeling is reported to occur to approximately thefirst thread, 1.5 to 2.0 mm apical to the implant-abutment junction23.
The philosophy of platform switching suggests that the circumferential horizontal difference in dimension between the implant and seating surface and the attached component keeps the implant-abutment junction further away from the marginal bone level, reducing the potential crestal bone loss. This was supported by clinical studies, as pointed out in the results of the present study, too24.
5. OCCLUSAL OVERLOAD
Present literature available on this concept stating that excessive bone strain may not result in physical fracture but may also cause bone cellular resorption. The amount and distribution of stress in the bone may lead to marginal bone loss, thus affecting osseointegration25.
The crestal bone around dental implants could be a fulcrum for lever action when a bending moment is applied, suggesting that implants could be more susceptible to crestal bone loss by mechanical force.
Factors associated with increased bending overload in dental implants10:
- Prostheses supported by one or two implants inthe posterior region26
- Straight alignment of implants
- Significant deviation of the implant axis fromthe line of action
- High crown/implant ratio
- Excessive cantilever length (>15 mm in themandible27; >10–12 mm in themaxilla26)
- Discrepancy in dimensions between the occlusaltable and implant head
- Para-functional habits, heavy bite force andexcessive premature contacts (>180 μm in monkeystudies28; >100 μm in human studies)
- Steep cusp inclination
- Poor bone density/quality
- Inadequate number of implants
The cortical bone is known to be least resistantto shear force, which is significantly increased by bending overload.Misch claimed that the stresses at the crestal bone may cause microfracture or overload, resulting in early crestal bone loss during the first yearof function, and the change in bone strength from loading and mineralisation after one year alters thestress-strain relationship and reduces the risk of microfracture during the following years3.
Wiskott and Belser29 described a lack of osseointegration attributed to increased pressure on the osseous bed during implant placement, establishment of a physiological biological width, stress shielding and lack of adequate biomechanical integration between the load-bearing implant surface and the surrounding bone.
Based on a study by Frost, 30 five types of strain levels interrelated with different load levels in the bone were described:
1) Disuse, bone resorption
2) Physiological load, bone homeostasis
3) Mild overload, bone mass increase
4) Pathological overload, irreversible bone damage
5) Fracture
The concept of “microfracture” was proposed byRoberts et al31, who concluded that crestal region saround dental implants are high-stress-bearing areas. They explained that if the crestal region is overloaded during bone remodelling, “cervical cratering” is created around dental implants. The study recommended axially directed occlusion and progressive loading to prevent microfracture during the bone-remodelling periods.
Progressive loading on dental implants during healing stages was ï¬rst described by Misch in the 1980s to decrease early implant bone loss and early implant failure. Based on the concept, progressive loading needs to be employed to allow the bone to form, remodel, and mature to resist stress without detrimental bone loss by staging application of diet, occlusal contacts, prosthesis design, and occlusal materials3.
Greater crestal bone loss observed at the ï¬rst year of function compared to following years can be explained by a reduced occlusal overload or increased resistance to occlusal overload after the ï¬rst year of function includes a functional adaptation of the oral musculature, wear of the prosthesis material, and/or an increase in bone density after a certain time period10.
6. IMPLANT DESIGN
Different amounts of marginal bone loss have been reported for different implant designs and shapes. It has been stated that implant body may affect the amount of strain at the implant-bone interface3. The design of an implant refers to a three-dimensional structure of animplant system characterized by shape, type of implant abutment mating, presence or absence of threads, thread design, surface topography and chemical composition32.The implant-abutment junction should have such a designthat it reduces the peak bone-implant interface shearstress and strain32.
Nordin et al33 showed that a conical implant had awider diameter and it resulted in bone resorption along theconical surface down to the first thread. Sakoh et al34showed that conical implants had a higher primary stability than cylindrical implants. Quaresma et al35 in FEA study reported that conical implants connected to conical abutment produced lower stresses on the alveolar bone and prosthesis and greater stress on abutment comparedto a cylindrical implant connected to screw-retained,internal hexagonal abutment. Using FEA Rieger and associates32 showed that tapered implants are better thancylindrical implants and truncated fins or serrations are better than untruncated fins, serrations or threads.
According to Hansson32 the implant-abutmentjunction should be located at the cervico-occlusal level not close to the region where implant starts to contactbone, because according to Saint Venant's principle, if the implant-abutment junction is close to the crestal bone level, it will increase the magnitude of stress and strain atthe site, resulting in bone loss. It was also found that bone resorption could be reduced when the abutments are smaller than the diameter of the implant body- platform switching36.
Surface of the implant also plays a crucial role.Experimental studies have shown that increased surface roughness requires more time for bone to create mechanical interlocking and risk of bone loss, once exposed to oral cavity, thus initial response is poor but once formed, is more effective32. From a biomechanical perspective wider implants allow maximum amount ofbone engagement and improved distribution of stresses in the surrounding bone and this may reduce stress around the crestal bone and potential bone loss37.
RISK FACTORS
A number of risk factors have been identified that may lead to the establishment and progression of peri-implant mucositis and peri-implantitis.
1. Bone physiology:
The bone is less dense and weaker at stage 2 implant surgery than it is after 1 year of prosthetic loading. Bone takes 52 weeks for its complete mineralization3. Thus the stress applied to the peri-implant bone may be greater to cause bone resorption during the 1st year of prosthetic loading, because bone strain are greatest at the crest.
2. Smoking:
Among the various factors that dispose to implant failure, smoking is considered to be the most significant cause. Gorman et al demonstrated that smoking is contributing factor to implant failure between time of placement and second stage surgery and was twice that of non smokers38.
Carlsson et al39,Nitzan et al40 , Fransson et al41, DeLuca and Zarb42 presented a 20-year study of two hundred thirty-five patients with seven hundred sixty-seven Branemark implants and reported no difference in bone loss in the first year of clinical loading, but a higher incidence of marginal bone loss in the smoking group in subsequent years.
A cross-sectional study demonstrated that smokers had an odds ratio of 3.8 of developing peri-implant mucositis and an odds ratio of 31.6 of developing peri-implantitis43.
3. Diabetes:
The evidence regarding the association between diabetes and peri-implantitis is limited. Systematic reviews indicated that the current evidence does not allow a definitive conclusion that diabetic patients have a higher incidence of peri-implantitis but is an important factor when assessing the relationship of diabetes with peri implantitis44.
CONCLUSION
Preserving the marginal/crestal bone is one of the critical factors that affect success of a dental implant. Marginal bone loss around implants is a complex problem which threatens the longevity of implants
- Presence of bacteria around natural teethand implant can cause bone loss leading to peri-implantitis and peri- mucositis.
- Biological width adjustment as a result of bone loss failed to explain the reason behind greter bone loss in soft bone compared to dense bone.
- If axial force is above average ,a pumping effect leading to flow of bacteria from the gap causing 0.5mm bone loss within two weeks after abutment – implant connection of Banermark two – stage implant .
- Occlsal overloading may cause marginal bone loss but as such there is no evidence to show that it is alone the reason for bone loss.
- The shape of implant , type of implant abutment mating, presence or absence of threads, thread design, surface topography and chemical composition also contributes to the marginal bone loss.
It is very unlikely to find one single reason causing marginal bone loss and hence is refer to as multifactorial .Yet the actual reason remains highly controversial.
REFERENCES
- Lanka Mahesh, ManeshLahori, Praful Bali, Sagrika. Marginal Bone Loss A Review Of Selected Literature Marginal Bone Loss In Posterior Region. The Journal Of Academy Of Oral Implantology, 3(5); Jan-Apr 2011:21-24.
- Lee DW, Choi YS, Park KH, Kim CS, Moon IS. Effect of microthread on the maintenance of marginal bone level: a 3-year prospective study. Clin Oral Implants Res. 2007;18:465-70
- Carl E. Misch. Stress treatment theorem for implant dentistry. Contemporary implant dentistry, 3rd edition. 68-91.
- Albrektsson, T., Zarb, G., Worthington, P. and Eriksson, A.R. (1986). The long-term efficacy of currently used dental implants: a review and proposed criteria of success. International Journal of Oral and Maxillofacial Implants 1: 11–25.
- Wilderman, M. N., Pennel, B. M., King, K. & Barron, J. M. (1970) Histogenesis of repair following osseous surgery. Journal of Periodontology.Oct;41(10); 551-565
- Eriksson RA, Albrektsson T. The effect of heat on bone regeneration: an experimental study in the rabbit using the bone growth chamber. J Oral MaxillofacSurg 1984. Nov;42(11):705-11.
- Matthews L, Hirsch C.Temperatures measured in human cortical bone when drilling. J Bone Joint Surg 1972. Mar;54(2):297-308.
- CananHekimoglu, Nesrin Anil, Murat C. Cehreli. Analysis of strain around endosseous dental implants opposing natural teeth or implants. J Prosthet Dent 2004;92:441-6.
- Albrektsson T, Isidor F, Consensus Report of Session IV. In: Lang NP, Karring T, eds, proceedings of the 1st European Workshop on Periodontology, London: Quintessence Publications Co, Ltd, 1994; 317-325
- Mohammed A. Alshehri. The maintenance of crestal bone around dental implants. implants, Vol. 11, Issue 3/2011; 30-36.
- LeonhardtA°, Adolfsson B, Lekholm U, Wikstro¨m M, Dahle´n G. A longitudinal microbiological study on osseointegrated titanium implants in partially edentulous patients. Clin Oral Implants Res 1993;4:113-120.
- Schou S, Holmstrup P, Reibel J, Juhl M, Hjorting-Hansen E, Kornman KS. Ligature-induced marginal inflammation around osseointegrated implants and ankylosed teeth: Stereologic and histologic observations in cynomolgus monkeys (Macacafascicularis). J Periodontol 1993;64:529-537
- Philip LM Tomson, Christopher J, Butterworth, et al. Management of peri-implant bone loss using guided bone renegeration: a clinical report. J prosthet dent 2004; 92:12-6.
- Karoussis IK, Salvi GE, Heitz-Mayfield LJA, et al. Long-term implant prognosis in patients with and without a history of chronic periodontitis: a 10 year prospective cohort study of the ITI dental implant system. ClinOralImpl Res 2003; 14:129-39.
- Frederic Hermann, Henriette Lerner, and AdyPalti. Factors Influencing the Preservation of the Peri-implant Marginal Bone. Implant Dentistry.16 (2); 2007: 1-15.
- Berglundh T, Lindhe J, Erricsson J et al. The soft tissue barrier at implants and teeth. Clin Oral Implants Res 2:81-90, 1991.
- Lindhe J, Berglundh T, Erricsson J et al. experimental breakdown of peri-implant and periodontal tissue. A study in beagle dogs. Clin Oral Implants Res 3:9-16, 1992.
- Kazuto Makigusa. Histologic comparison of biologic width around teeth versus implants: The effect on bone preservation. Journal of implant and reconstructive dentistry 1:20-24, 2009.
- Berglundh T, Lindhe J. dimensions of the periimplant mucosa. Biological width revisited, j clin periodontal 1996; 23:971-973.
- Tarnow DP. Dental implants in periodontal care.CurrOpinPeriodontol. 1993:157-62.
- Broggini N ,McManus LM , etal .Persistent acute inflammation at the implant abutment interface .J Dent Res 2006 ; 85 :232-237.
- BerglundhT ,Soft tissue interface and response to microbial challenge.Implant Dentistry 1999:153-174.
- HakanBilhan, EmreMumcu, SevinErol, and O¨ merKutay. Influence of Platform-Switching on Marginal Bone Levels for Implants With Mandibular Overdentures: A Retrospective Clinical Study.
- Degidi M, Iezzi G, Scarano A, et al. Immediately loaded titanium implant with a tissue-stabilizing/maintaining design (‘beyond platform switch’) retrieved from man after 4 weeks: a histological and histomorphometrical evaluation. A case report. Clin Oral Implants Res. 2008;19:276-282.
- Arturo N. Natali, Piero G. Pavan, Andrea L. Ruggero. Evaluation of stress induced in peri-implant bone tissue by misfit in multi-implant prosthesis. Dental materials (2006) 22, 388-395.
- Rangert B, Krogh PH, Langer B, Van Roekel N.Bending overload and implant fracture: a retrospective clinical analysis.Int J Oral Maxillofac Implants. 1995 May-Jun;10(3):326-34.
- Shackleton JL, Carr L, Slabbert JC, Becker PJ.Survival of fixed implant-supported prostheses related to cantilever lengths.J Prosthet Dent. 1994 Jan;71(1):23-6.
- Miyata T, Kobayashi Y, Araki H, Ohto T, Shin K.The influence of controlled occlusal overload on peri-implant tissue. Part 3: A histologic study in monkeys.Int J Oral Maxillofac Implants. 2000 May-Jun;15(3):425-31.
- Wiskott HW, Belser UC. Lack of integration of smooth titanium surfaces: a working hypothesis based on strains generated in the surrounding bone.Clin Oral Implants Res. 1999 Dec;10(6):429-44.
- Frost HM.Wolff's Law and bone's structural adaptations to mechanical usage: an overview for clinicians.Angle Orthod. 1994;64(3):175-88.
- Roberts WE, Garetto LP, DeCastro RA.Remodeling of devitalized bone threatens periosteal margin integrity of endosseous titanium implants with threaded or smooth surfaces: indications for provisional loading and axially directed occlusion.J Indiana Dent Assoc. 1989 Jul-Aug;68(4):19-24.
- Murat Cehreli, SamimeSahin, KivancAkca. Role ofmechanical environment and implant design on bonetissues differentiation: current knowledge and futurecontexts. Journal of dentistry (2004)32, 123-132.
- Nordin T, Jonsson G, Nelvig P, Rasmusson L (1998)The use of a cortical fixture design for fixed partialprostheses. A preliminary report. Clin Oral ImplantsRes 9:343347
- Sakoh J, Wahlmann U, Stender E et al (2006).Primary stability of a conical implant and a hybridcylindric screw-type implant in vitro. Int J OralMaxillofac Implants 21:560566.
- Quaresma SE, Cury PR, Sendyk WR et al (2008) Afinite element analysis of two different dentalimplants: stress distribution in the prosthesis,abutment, implant, and supporting bone. J OralImplantol 34:16.
- MatteoDanza, PietroTortora, Alessandro Quaranta.Randomizes study for the 1-year crestal bonemaintenance around modifies diameter implants withdifferent loading protocols: a radiographic evaluation.Clin Oral Invest 10.1007/s00784-009-0314-0.
- Jae-Hoon Lee, Val Frias, Keun-Woo Lee, RobertF.Wright, Effect of implant size and shape on implantsuccess rates: A literature review. J Prosthet Dent2005; 94:377-81
- Traini T, Assenza B, San Roman F, Thams U, Caputi S, Piattelli A. Bone microvascular pattern around loaded dental implants in a canine model. Clin Oral Investig 2006; 10:151–156.
- Carlsson GE, Lindquist LW, Jemt T. Long-term marginal periimplant bone loss in edentulous patients. Int J Prosthodont 2000;13:295–302
- Nitzan D, Mamlider A, Levin L, Schwartz-Arad D. Impact of smoking on marginal bone loss. Int J Oral Maxillofac Implants 2005;20:605–609.
- Gorman LM ,LambertPM,MorrisHF,Winkler S .The effect of smoking on implant survival at second stage surgery . Implant Dent 1994;3:165-168
- Haas R, Haimböck W, Mailath G, Watzek G. The relationship of smoking on peri-implant tissue: a retrospective study. J Prosthet Dent 1996; 76:592–596
- Rinke S, Ohl S, Ziebolz D, Lange K, EickholzP.Prevalence of peri-implant disease in partially edentulous patients: A practice-based cross-sectional study. Clin Oral Implants Res 2011;22:826-833.
- Strietzel FP, Reichart PA, Kale A, Kulkarni M, Wegner. B, Kuchler I. Smoking interferes with the prognosis of dental implant treatment: A systematic review and meta-analysis. J ClinPeriodontol 2007;34:523-544.
Disclaimer from Guident
The views and opinions expressed in articles published in Guident are solely those of the authors and do not necessarily reflect the views of the editors, the editorial board or the publisher, Ivory India. Guident does not endorse any product, technique or treatment described. Clinical content is intended for qualified dental and medical professionals and is not a substitute for individual clinical judgement. Guident, its editors and the publisher accept no liability for any consequence arising from the use of information published in the journal.
How to cite this article
Dr. Babina Chirom, Dr. Rathika Rai, Dr. Geetha. Factors Affecting Marginal Bone Loss. Guident. 2014 Oct;7(11). Available from: https://ivoryindia.in/articles/prosthodontics/factors-affecting-marginal-bone-loss.html






