Open AccessPeer ReviewedPublished Monthly Since 2007 Vol. 19, Issue 12 · November 2026Media Kitinfo@guident.net

Virtual Articulators: A Dexterous Innovation in Dentistry

  • Dr. Athira K SSenior Lecturer
  • Dr. Vinaya MuraliSenior Lecturer
  • Dr. Revathy C VSenior Lecturer

Department of Prosthodontics and Crown & Bridge, Sree Mookambika Institute of Dental Sciences, Kulasekharam India, Department of Prosthodontics and Crown & Bridge, KVG Dental College and Hospital, Sullia, India, Department of Prosthodontics and Crown & Bridge, Sri Sankara Dental College, Varkala, India

Guident · Volume 19, Issue 11 (October 2026)Published October 202614 min read

ABSTRACT

Virtual reality is a technology based on computers that permits us to explore and see a three-dimensional environment in reality.1 Virtual design processes in the field of dentistry have advanced due to the utilization of computer-aided design (CAD) systems and reverse engineering tools2, which allow for the incorporation of kinematic analysis.3,4 The virtual articulator, an application in prosthetic and restorative dentistry that uses virtual reality technology, is capable of overcoming the constraints of the mechanical articulator.3,4 Through the simulation of genuine patient information, this app can enable the analysis of both static and dynamic occlusion as well as jaw relations.3,4,5

Recent advancements in digital workflows, including the integration of digital impressions, jaw tracking systems, and 3D imaging, have further established the virtual articulator as a powerful alternative to traditional methods.6,7 In every aspect of healthcare, virtual digital technology is extensively employed.8 Virtual articulators have enabled the analysis of occlusion using synthetic dental models that can replicate all mandibular movements in both static and dynamic positions.6,7 Virtual articulators have the potential to improve education and practice if used in conjunction with supplementary software.9,10 They can enable swift and accurate personalized diagnoses, as well as facilitate discussions about possible dental treatment plans.11,12

Keywords: jaw motion analyzer, virtual dental patients, product design laboratory, reverse engineering, computer-aided inspection software, haptics, artificial intelligence, digital dentistry, CAD/CAM.

INTRODUCTION

A multisensory, immersive, and interactive experience is what virtual reality alludes to. It is a 3-dimensional computer-generated art that is oriented towards the viewer. With the help of this technology, you can view the present in three dimensions while taking six different angles into account. Virtual reality is essentially a replica of the real, physical world for the real environment. The tools and systems available to facilitate communication and engagement create a virtual enclosure that can stand. Under the name of virtual reality, equipment is widely recognized.

The introduction of computer-aided design and computer-aided manufacturing (CAD/CAM) systems has facilitated a paradigm shift toward digital workflows in modern prosthodontics. Within this digital ecosystem, virtual articulators have emerged as crucial tools designed to simulate jaw movements digitally, eliminating the mechanical constraints and preset value reliance of conventional mechanical articulators.

There are two types of virtual articulators namely Completely adjustable and Mathematically simulated.

COMPLETELY ADJUSTABLE VIRTUAL ARTICULATOR 2,3

  • It uses an electronic jaw registration system called Jaw Motion Analyser (JMA) to record/reproduce exact movement paths of the mandible.
  • The digitised dental arches then move along these movement paths that can be viewed in the computer screen consisting of three main windows showing the same movement of the arches from different planes.

The software calculates and visualises both static and kinematic occlusal collisions and is used in designing and correction of occlusal surfaces in computer-aided designing (CAD) systems (e.g., Kordass and Gartner virtual articulators). The software of the DentCAM virtual articulator developed at the University of Greifswald consists of three main windows and a slice window, which show the same movement of teeth from different aspects:

  • Rendering window: Shows both jaws during dynamic occlusion and can visualise unusual views throughout dynamic patterns of occlusion (i.e., the view from the occlusal cusps while watching the antagonistic teeth coming close to the intercuspidation position during chewing movements).
  • Occlusion window: Shows the static and dynamic occlusal contacts sliding over the surfaces of the upper and lower jaw as a function of time.
  • Smaller window: The movements of the temporomandibular joint are represented in a sagittal and transversal view which allows the analysis and diagnosis of interdependencies between tooth contacts and movements of the temporomandibular joint.
  • Slice window: With this window, the analysis of guidance and balancing becomes easy. It shows any frontal slice throughout the dental arch. This tool helps to analyse the degree of intercuspidation and the height and functional angles of the cusps.

The recent software versions incorporate an orthodontic module allowing the creation of a virtual setup. The program has also been equipped with the representation of the condylar trajectories in the sagittal and horizontal planes. This software tool allows us to observe the inter-relationship between the incisal guide and the condylar guide, and the effects of joint mobility upon occlusion.4

MATHEMATICALLY SIMULATED VIRTUAL ARTICULATOR 5

  • It records/reproduces movements of the articulator based on mathematical simulation of articulator movements. A fully adjustable 3D virtual articulator. These virtual articulators allow for additional settings such as curved bennett movement or other movements for adjustment in ideal settings.

DISADVANTAGE

It behaves as an average value articulator and it is not possible to obtain individualised movement paths of each patient. Eg: Stratos 200, Szentpetery’s virtual articulators.

HISTORY OF THE VIRTUAL ARTICULATOR

Historically, VA software was first described by Szentpetery in the late 1990s and the first VA was introduced in 2002 with the work of Bisler and his team from the University of Greifswald, Germany. Bisler et al. defined the VA as a tool for the analysis of the complex static and dynamic occlusal relations, with the goal of helping clinicians reach beyond the limits of traditional analogue techniques involving a MA. Since then, the use of VAs has been applied to computer-aided design and computer-aided manufacturing (CAD/CAM) dentistry.

DentCam (Kavo; Hamburg, Germany) was the first software including VA functionality. The prerequisite for the digital acquisition of tooth data (single tooth or dental arches and occlusal registration) is the 3D laser scan 9. Bisler et al. proposed the use of a “Scan 3D” (Willytec; Munich, Germany), which allowed direct scanning of the arches and occlusal registration, making the data available for virtual presentation, manipulation, and navigation. In order to capture the dynamic elements of occlusion and masticatory function, it was necessary to use a specific device called a Jaw Motion Analyzer (JMA) (Zebris Company; Isny, Germany) which measures the speed of ultrasonic pulses emitted by transmitters and sensors to record mandibular movements. This additional tool allows mandibular movements to be analyzed in all their spatial, rotational, and translational components. Special sensors are also used to determine the anterior and posterior reference points, as well as occlusal contacts.6

DEVELOPMENT AND DESIGNING OF VIRTUAL ARTICULATOR

It is achieved by means of computer-aided design (CAD) systems and reverse engineering tools. The development is made at the product design laboratory (PDL) in the faculty of Engineering of Bilbao (The University of the Basque Country) in collaboration with the department of prosthetics of the Martin-Luther University of Halle.

The tools used are: Handyscan REVscan 3D scanner and its software (VXscan), Reverse engineering and computer-aided inspection software (Geomagic Studio and Qualify), Rapidform XOR, ATOS I rev.2 GOM 3D scanner. After the virtual articulator is constructed, all the measurements are verified and checked. Rectification and redesigning may be needed if encountered with any problems.7

PROGRAMMING OF VIRTUAL ARTICULATORS

It was described by Kordass and Gartner in 1999. Prerequisite for visualization on screen is 3D scanning/digitizing of tooth surface or restorations or denture models using 3D scanner. The scanning can be done in 2 ways:

  • DIRECT DIGITISING - done directly from the patient’s mouth using an intraoral scanner.
  • INDIRECT DIGITISING - done outside on the patient’s master cast obtained after making the final impression.

The scanned data helps to obtain the real geometry of the mouth and its relative location are reconstructed in a CAD system using the face bow. In the second phase, the type of articulator is selected depending on the required accuracy and/or on the patient’s setting data available in each case. Once the dental prosthesis is modelled, the functional simulation is performed in order to obtain the interfering collision points which could produce a disease in the temporomandibular joints. Excursive movements, such as protrusion and laterotrusion are simulated using a CAD system, analyzing possible occlusal collisions. Finally, the dental prosthesis is milled and tested on the mouth of the patient.

ADVANTAGES AND DISADVANTAGES OF VIRTUAL ARTICULATORS 8,11,12

ADVANTAGES:

  • Give rise to better communication between the dentist, dental technician and patient.
  • Work seamlessly with CAD/CAM systems to design the occlusal surface.
  • Examine not only the static but also the dynamic occlusion.
  • Analyze the gnathic and joint conditions.
  • Eliminate the problems caused by manufacturing, visualize certain regions in 3D, and simplify procedures for the dentist and technician.
  • Are more time-efficient and reduce laboratory remakes.
  • Eliminate the need for conventional facebow transfers and protrusive bite-registration procedures, creating a streamlined digital workflow.
  • Allow clinicians to create four-dimensional virtual patient models that accurately represent both static and dynamic relationships for enhanced diagnosis.
  • Simulate the real patient, helping to modify the restoration and educate the patient.

DISADVANTAGES:

  • Lead to high purchasing and managing costs, because virtual articulators require supplemental technology, such as digital sensors, digital scanners, software and multiple articulator models.
  • Require complex technical information, data inputs, recording scanner parameters, and advanced knowledge of CAD/CAM technology (Koralakunte and Aljanakh, 2014; Agnini et al., 2015).
  • High variability among different virtual articulator systems complicates the standardization and comparison of clinical outcomes.
  • Potential for distortions during digital file integration (e.g., CBCT and intraoral scans), making robust data superimposition algorithms a necessity.

VIRTUAL PATIENTS IN DENTISTRY

The diagnostic methods utilising virtual patients include cone beam computed tomography (CBCT), working casts, face scans (FS) and photography; recently, treatment concepts based on digital workflows with intraoral scanning (IOS), the rapid manufacturing of dental prostheses and computer-assisted implant surgery have also been adopted. In light of these developments, virtual dental patients (VDPs) that replicate the superficial surface of the skin combined with the underlying bony structures of the skull and teeth including the oral soft tissue layers are needed.8

ADVANTAGES OF VIRTUAL PATIENTS 8

  • Make it possible to present the entire treatment plan in 3D to a patient.
  • Patient’s expectations are shaped visually.
  • Several alternative treatment plans can be created.
  • Simulate the progress step-by-step non-invasively.
  • Decrease the number of patient visits, enhancing the doctor’s productivity and the patient’s quality of life, and thus increasing the cost-effectiveness of treatment.
  • High-precision anatomical documentation.
  • Streamline interdisciplinary communication between the dentist and dental technician is possible.
  • Enhance student learning of the static and dynamic maxillofacial relationships.

VIRTUAL REALITY HAPTIC SYSTEM

Virtual reality systems also go by the name of haptics. The Greek word "haptein," which means "contact or to touch," is the source of the word "haptics." Haptics is the term for sensing and interacting through touch, allowing the user to touch and feel a distant item or virtual reality indirectly. The current computer models, which only include sight and sound, can now include this sensation. Also, it forces feedback on those who interact with remote or virtual surroundings, creating a two-way flow of information.

Operators can receive input from computer applications in the form of sensations that are sensed in any region of the body by using specialised equipment such as joysticks, data gloves, etc. People can be trained for actions that involve hand-eye coordination using haptic technology in conjunction with a visual display, such as drilling into a carious lesion or making an incision in the mouth. In order to give dental laboratories even more options, performance, and flexibility when digitally designing and manufacturing a variety of dental restorations, Sensable Dental Technologies has created the most recent version of their Intellifit TM TE (Touch-Enabled) digital restoration system.

FUTURE WORK

In the future, it will be necessary to create a virtual articulator programme that incorporates the CAD/CAM system's correction software right into the process of building crowns and bridges. Recent studies indicate that future developments will heavily focus on the integration of Artificial Intelligence (AI)—specifically machine learning and artificial neural networks—to enhance predictive modeling and refine the algorithms used for digital data superimposition.

Additionally, standardizing digital protocols, improving jaw tracking accuracy, and integrating multi-layered virtual patient models (combining CBCT, facial scans, and intraoral scans) will be crucial. Currently, the lack of a universal digital face-bow transfer protocol can make complex mounting challenging, but as AI-driven methodologies advance, the reliability and automation of maxillary cast transfers will continue to improve, making VAs an absolute standard tool in routine dental practice.

CONCLUSION

Virtual reality offers a fresh perspective for visualising intricate connections between occlusion diagnosis and function. The new virtual articulator offers intriguing modules for showing and studying the dynamic contact of the mandibular and maxillary occlusal surfaces and its relationship to condylar movement. The occlusal profile of the teeth can be created with more or fewer cusps to reduce or remove occlusal interferences with the dynamic pattern, which will improve the functional occlusion. A milling machine can use the data set of freshly created and improved occlusal surfaces to create actual crowns and fixed restorations with that specific, ideal functional occlusion.

The virtual articulator is a fundamental instrument that primarily deals with the functional aspects of the occlusion, but it may also be seen as a key component in many therapeutic and diagnostic treatments, as well as in the production of CAD-CAM dental restorations. Virtual Articulators, bolstered by emerging AI integration and comprehensive virtual patient frameworks, will continue to replace mechanical tools and fundamentally alter modern dental manufacturing and communication methods.9,14

REFERENCES

Completely Adjustable Virtual Articulator

Virtual articulators (VAs) are advanced digital tools in prosthodontics and restorative dentistry, enabling clinicians to simulate mandibular movements and analyze occlusal relationships with precision.

Electronic Jaw Registration Systems

Modern VAs use electronic jaw registration systems such as the Jaw Motion Analyzer (JMA) to record and reproduce mandibular movement paths. Digitized dental arches are animated along these paths and displayed on computer screens through multiple windows that visualize occlusion from different planes. The DentCAM virtual articulator developed at the University of Greifswald incorporates:

  • Rendering window – shows dynamic occlusion from unusual perspectives, such as cusp-to-cusp contact during chewing movements.3,4
  • Occlusion window – visualizes static and dynamic occlusal contacts over time.3,4
  • TMJ window – represents temporomandibular joint movements in sagittal and transversal views.3,4
  • Slice window – allows analysis of intercuspidation, cusp angles, and balancing guidance.3,4

Recent versions include orthodontic modules and condylar trajectory visualization, enabling clinicians to study the relationship between incisal and condylar guidance.3,4

Mathematically Simulated Virtual Articulators

Another category of VAs reproduces articulator movements through mathematical simulation. These fully adjustable 3D systems allow settings such as curved Bennett movements. However, they behave as average-value articulators and cannot capture individualized patient movement paths.5

Historical Development

The earliest VA software was described by Szentpétery (1997)5, focusing on computer-aided correction of digitized occlusal surfaces. The first clinically applied VA was introduced in 2002 by Kordass and colleagues3, defining the VA as a tool for analyzing complex static and dynamic occlusal relations beyond the limits of traditional mechanical articulators.

CAD/CAM Integration

Development of VAs has been closely tied to CAD/CAM dentistry. At the University of the Basque Country, Solaberrieta et al. (2009)2 designed a VA for simulating mandibular movements in digital workflows. These systems rely on 3D scanning and reverse engineering tools to digitize dental arches and integrate them into CAD platforms.

Programming and Simulation

Kordass & Gärtner (2003)4 described programming protocols for VAs, requiring 3D digitization of tooth surfaces via intraoral or cast scanning. Once digitized, excursive movements such as protrusion and laterotrusion can be simulated to identify occlusal collisions before prosthesis fabrication.

Advantages

  • Enhanced communication between dentist, technician, and patient.1
  • Seamless integration with CAD/CAM systems.12
  • Analysis of both static and dynamic occlusion.6,7
  • Elimination of conventional facebow transfers and bite registrations.1
  • Improved efficiency and reduced laboratory remakes.7
  • Creation of four-dimensional virtual patient models for diagnosis and education.8

Disadvantages

  • High costs due to supplemental technology requirements.1
  • Need for advanced technical knowledge and CAD/CAM expertise.12
  • Variability among systems complicates standardization.6
  • Potential distortions during digital file integration.6

Virtual Patients

Recent developments extend VAs into virtual patient models, combining CBCT, facial scans, and intraoral scans. These models replicate soft tissue, bone, and dentition, enabling comprehensive treatment planning, patient education, and interdisciplinary communication.8

ADVANCES IN 2025

Recent studies have expanded the scope of VAs:

  • AI-driven technologies enhance predictive modeling and condylar guidance simulations, improving precision in digital workflows.10
  • A systematic review (2025) confirmed that VAs improve diagnostic accuracy and workflow efficiency, but highlighted variability in algorithms and the need for standardized digital facebow protocols.11
  • An in-vitro comparative study (2025) showed clinically acceptable accuracy in simulating occlusal contacts, though discrepancies in contact points remain, reinforcing the need for validation before routine clinical use.12

Future Directions

Future VAs will integrate AI-driven algorithms, improve jaw tracking accuracy, and standardize digital protocols. The ultimate goal is seamless incorporation into CAD/CAM workflows, making VAs a routine tool in prosthodontics.6,10

REFERENCES

  1. Koralakunde P, Baig MH, Patil S. The role of virtual articulator in prosthetic and restorative dentistry. J Clin Diagn Res. 2014;8(7):ZE25?ZE28.
  2. Solaberrieta E, Etxaniz O, Minguez R, Muniozguren J, Arias A. Design of a virtual articulator for the simulation and analysis of mandibular movements in dental CAD/CAM. In: Proceedings of the 19th CIRP Design Conference – Competitive Design. Cranfield: Cranfield University; 2009. p. 323.
  3. Kordass B, Gartner C, Sohnel A, Bisler A, Voss G, Bockholt U, et al. The virtual articulator in dentistry: concept and development. Dent Clin North Am. 2002;46(3):493?506.
  4. Gartner C, Kordass B. The virtual articulator: development and evaluation. Int J Comput Dent. 2003;6(1):11?24.
  5. Szentpétery A. Computer?aided dynamic correction of digitized occlusal surfaces. J Gnathol. 1997;16:53?60.
  6. Lepidi L, Galli M, Grammatopoulos E, Wang HL, Paolone G, Cattoni F. Virtual articulators and virtual mounting procedures: where do we stand? J Prosthodont. 2021;30(1):24?35.
  7. Luthra RP, Sharma A, Arora A, Sharma R. Virtual articulators in prosthetic dentistry: a review. J Adv Med Dent Scie Res. 2015;3(4):117?121.
  8. Ozdemir G. Virtual articulators, virtual occlusal records and virtual patients in dentistry. J Exp Clin Med. 2021;38(S2):129?135.
  9. Jain T. Virtual articulator: a review of functioning and designing. Indian J Dent Sci. 2014;6(5):85?88.
  10. Lobo S, Argolinha I, Machado V, Botelho J, Rua J, Li J, Mendes JJ. Advances in digital technologies in dental medicine: enhancing precision in virtual articulators. J Clin Med. 2025;14(5):1495.
  11. Botelho J, Machado V, Mendes JJ. Virtual articulator software: current accuracy and clinical applicability – a systematic review. J Prosthodont Res. 2025;69(2):145?153.
  12. Hanna M, Martani H, Seryoka N. Comparative evaluation of virtual articulators in simulating occlusal contacts: an in vitro validation study. J Prosthet Dent. 2025;134(4):512?519

Disclaimer from Guident

The views and opinions expressed in articles published in Guident are solely those of the authors and do not necessarily reflect the views of the editors, the editorial board or the publisher, Ivory India. Guident does not endorse any product, technique or treatment described. Clinical content is intended for qualified dental and medical professionals and is not a substitute for individual clinical judgement. Guident, its editors and the publisher accept no liability for any consequence arising from the use of information published in the journal.

How to cite this article

Dr. Athira K S, Dr. Vinaya Murali, Dr. Revathy C V. Virtual Articulators: A Dexterous Innovation in Dentistry. Guident. 2026 Oct;19(11). Available from: https://ivoryindia.in/articles/prosthodontics/virtual-articulators-a-dexterous-innovation-in-dentistry.html

Related articles

More in Prosthodontics

All 386 articles
Call for papers

Publish your clinical work in Guident

Original research, case reports and review articles are welcomed from clinicians and researchers worldwide. Every submission is assessed by the editorial board.