Open AccessPeer ReviewedPublished Monthly Since 2007 Vol. 19, Issue 12 · November 2026Media Kitinfo@guident.net

Trends and Techniques for Effective Sterilization in Dentistry

  • By Team ORO
Guident · Volume 16, Issue 11 (October 2023)Published October 20232 min read

Sterilization is an essential step in the reprocessing of reusable dental instruments that have become contaminated with saliva, blood or other biological fluids. The aim of sterilization is to break the chain of cross-infection between patients by killing micro-organisms, including spores. The sterilization processes that have traditionally been used include- steam, ethylene oxide (Et), ionizing radiation (gamma or E-beam), low- temperature steam and formaldehyde, and dry heat (hot air). However, keeping up with the trend is equally important. Within the last two to four years, incubation-time for steam and hydrogen peroxide biological indicators are now available in as little as 24 minutes, which can provide a significant improvement in efficiency of the sterilized load release.

  1. Chemical Processes (Gas/Liquid) most of the new methods are oxidative processes based on "peroxy" compounds. These include sterilant based on compounds such as hydrogen peroxide, peracetic acid, peroxyl sulphates, chlorine dioxide, and ozone.
  2. Low-Temperature Steam and Formaldehyde- It is an example of synergism in that it brings together steam at sub atmospheric pressure and formaldehyde gas—neither of which is markedly sporicidal—to produce a highly efficient sporicidal effect.
  3. Peracetic Acid: currently used in a number of sterilization processes. Examples include liquid systems such as the Steris machine (Steris Corp., Mentor, OH) for endoscopes, or use as a liquid sterilant in suitable disinfector.
  4. Hydrogen Peroxide: Hydrogen peroxide as a 3% aqueous solution has long been used as an antiseptic. The use of hydrogen peroxide as a vapor-phase sterilant was developed by Amsco in the United States as the VHP system. This process was originally developed in several formats, including a cassette system for endoscopes, a freestanding system for environmental decontamination, a system for use in sterilizing lyophilizes and isolators, and a general-purpose unit for the sterilization of medical devices.
  5. Nitrogen dioxide: Nitrogen dioxide is a sterilant gas that is used in the terminal sterilization of medical instruments. The NO2 sterilization process has been validated for the terminal sterilization of medical devices using typical sterilization chamber-based systems. There are unique advantages with the NO2 process that are not available with other sterilant gases. These advantages include operation at room temperature, a relatively low sterilant concentration, rapid microbicidal activity, and minimal sterilant residuals on processed articles. These advantages permit the use of the NO2 process in low-resource environments.
  6. New materials and technologies are continually being introduced into the medical device industry. with increasing regulatory pressures, combined with the need to identify cost-savings, effective sterilization is an area which going to be even more significant in the future.

Disclaimer from Guident

The views and opinions expressed in articles published in Guident are solely those of the authors and do not necessarily reflect the views of the editors, the editorial board or the publisher, Ivory India. Guident does not endorse any product, technique or treatment described. Clinical content is intended for qualified dental and medical professionals and is not a substitute for individual clinical judgement. Guident, its editors and the publisher accept no liability for any consequence arising from the use of information published in the journal.

How to cite this article

By Team ORO. Trends and Techniques for Effective Sterilization in Dentistry. Guident. 2023 Oct;16(11). Available from: https://ivoryindia.in/articles/general/trends-and-techniques-for-effective-sterilization-in-dentistry.html

Related articles

More in General

All 212 articles
Vol. 16, Issue 11 · October 2023

Graphene in Dentistry: A Review

Graphene has many unique properties, and research shows it has many applications in dentistry. Though there are challenges in the use of Graphene, Graphene has shown promising results in…

Dr. Charu Dayal

Vol. 16, Issue 10 · September 2023

CAD-CAM: Standing on the Shoulder of Giants-a Review

The future of dentistry is increasingly being defined by digital dentistry. As dental field transitions into the digital era of image capture, robotic dental restoration and computer design…

Dr. Awani Gupta

Vol. 17, Issue 1 · December 2023

Isolation in Clinical Dentistry: Part-1

Each dental procedure is unique in its set of requirements. While water is essential during tooth preparation, its presence during bonding can result in premature failure. As such, success…

Dr. Moez I. Khakiani

Vol. 16, Issue 9 · August 2023

Root Canal Treatment in Pediatric Dentistry

Root Canal Treatment (RCT) is also called as endodontic treatment of a tooth. Tooth has 2 outer layers which are hard, called as Enamel and Dentin. These 2 layers cover an inner most part…

Dr. Swapnil Rachha

Call for papers

Publish your clinical work in Guident

Original research, case reports and review articles are welcomed from clinicians and researchers worldwide. Every submission is assessed by the editorial board.