Open AccessPeer ReviewedPublished Monthly Since 2007 Vol. 19, Issue 12 · November 2026Media Kitinfo@guident.net

An Answer to Thin Alveolar Bone: Osseodensification

  • Dr. Bisma ReyazP.G. Student
  • Dr. C. PradeepP.G. Student
  • Dr. Manesh LahoriDean & HOD

Department of Prosthodontics, K.D. Dental College & Hospital, Mathura, UP

Guident · Volume 13, Issue 9 (August 2020)Published August 20207 min read9 figures

ABSTRACT

One of the most important factors that affect osseointegration is the primary stability of the implant. Dental implants inserted at the posterior region of maxilla exhibit the lowest success rate as the low density bone in this area often jeopardize rigid fixation of the implant. Many surgical techniques have been developed to increase the primary stability of an implant placed in low density bone, such as bicortical fixation of implant, undersized preparation of implant bed and bone condensation by the use of osteotomes. A new promising technique named osseodensification, has been recently developed that creates an autograft layer of condensed bone at the periphery of implant bed by the aid of specially designed burs rotating in a clockwise and anticlockwise direction. The purpose of this review is to emphasize that implant primary stability is strongly influenced by the surgical technique, to quote and briefly analyze the various surgical procedures laying weight to osseodensification procedure.
KEYWORDS: primary stability, secondary stability, densah burs, osteotomy procedure

INTRODUCTION

Dental implants are the milestones in dentistry, and numerous alternative oral therapies that could not be possible with conventional techniques have become possible. The prognosis of any implant procedure relates to the patient-related factors including the bone volume and quality and procedure-dependent parameters which include type of implant, type of surgical procedure. The stability of the implant can be defined either as the mechanical stability between the implant and the bone, or the biological stability that is achieved by Osseointegration.
The main factor in implant placement is to achieve primary implant stability. Primary stability is achieved upon insertion of implant. It is based on the physical interactions between the bone and the implant. Osseointegration is defined as a direct structural and functional connection between ordered, living bone and the surface of a load carrying implant. Osseointegration is crucial for implant stability which determines the long term success of dental implant.

PRIMARY STABILITY

  • Primary stability in implant placement is one of the most critical factors determining the outcome of implant therapy. It is accomplished when there is no micromovement of implant in its completely seated position. This allows the implant to mechanically interlock with the bone tissue until secondary stability is achieved. Implant primary mechanical stability is directly related to surrounding bone quality and quantity Maintaining and preserving bone during osteotomy preparation leads to increased primary mechanical stability, increased bone to implant contact (BIC), which then enhances implant secondary stability, and accelerates healing.
  • The key factors in enhancing implant primary stability are bone density,surgical protocol,and implant thread type and geometry. Primary implant stability has been considered as an indicator for future osseointegration, hence the key to long term clinical success. Primary implant stability at the time of placement is often analysed by judging the presence of any mobility of implant. The primary stability on chair side can be evaluated by checking mobility using a blunt instrument such as a mirror handle and during follow-up visits, it can be estimated by devices such as Periotest, Periometer, Resonance Frequency Analysis (RFA), and placement torque .

PRINCIPLE OF OSSEODENSIFICATION

  • OD, a bone nonextraction technique, was developed by Huwais in 2013 and is done by using specially designed burs (Densah burs).Osseodensification (OD) is a new method of biomechanical bone preparation performed for dental implant placement. The procedure is characterized by low plastic deformation of bone that is created by rolling and sliding contact using a densifying bur that is fluted such that it densifies the bone with minimal heat elevation.
  • The rationale behind this process is the densification of the bone that will be in immediate contact to the implant results in higher degrees of primary stability due to physical interlocking between the bone and the device, faster new bone growth formation due to osteoblasts nucleating on instrumented bone that is in close proximity with the implant . Consistent osteotomies and densification are considered to be vital for increased IT, implant primary stability and early loading. Higher IT values and denser peri-implant bone together increase primary stability and healing, and minimize implant micromotion. With OD, bone sacrifice was avoided which appears unavoidable with conventional drilling procedures, and also prevented fracture of trabeculae, which causes a delayed bone growth, that appears with the osteotome technique.
  • OD technique also helps in bone expansion so that wider diameter implants could be inserted in narrow ridge without creating bone dehiscence or fenestration

CHARACTERISTICS OF OSSEODENSIFICATION BURS

Huwais S ,goal was to create a new instrument and procedure to maintain healthy bone while preparing osteotomies rather than remove it, led to the concept of OD and creation of densah bur. These are Specially designed bur that has many lands with a large negative rake angle, which work as noncutting edges to increase the density of the bone as they expand an osteotomy. These densifying burs have four or more lands and flutes that smoothly compact the bone. They are designed to have a cutting chisel edge and a tapered shank. These burs are used with a standard surgical engine with bur rotating in the noncutting direction (counterclockwise at 800–1,200 rotations per minute) or drill bone by rotating in the cutting direction (clockwise at 800–1,200 rotations per minute).

Clinical figure

Clinical figure

MECHANISM OF THE DENSIFYING BURS

Specially designed densah burs precisely cut bone in the clockwise direction and densify bone in a non cutting counterclockwise direction combined with copious irrigation which facilitates the surgical technique during implant placement. Copious amounts of irrigation fluid during this procedure provide lubrication between the bur and bone surfaces and eliminate overheating. A recommended technique is for the surgeon to utilize a bouncing motion of the bur in and out of the osteotomy, which will induce a pressure wave ahead of the point of contact.

Clinical figure

OSTEOTOMY PREPARATION IN OSSEODENSIFICATION

Densah Burs are novel and proprietary surgical devices. They are designed to precisely cut bone in the clockwise (CW) direction at 800-1500 RPM and also densify bone in a non-cutting counterclockwise (CCW) direction at 800-1500 RPM with copious irrigation. Operating at a counterclockwise speed, it is able to preserve bone, and gradually densify and expand the bone to prepare the osteotomy for implant placement.
During Osseodensification, they produce a controlled bone plastic deformation, which allows the expansion of a cylindrical osteotomy without excavating any bone tissue and progressively increase in diameter throughout the surgical procedure.

Clinical figure

cutting mode

Clinical figure

densifying mode

Clinical figure

Clinical figure

Clinical figure

ADVANTAGES OF OSSEODENSIFICATION

  • Compaction autografting/condensation:OD maintains the bulk of bone by condensation which results in higher BIC.
  • Enhances bone density: the densah burs allow bone preservation and condensation through compaction autografting during osteotomy preparation, increasing the peri-implant bone density (BV%), and the implant mechanical stability.
  • Residual ridge expansion: Narrow ridges are shown to expand in width along with OD thus facilitating for placement of large diameter implants and also avoiding of fenestration and dehiscence defect.
  • Increases residual strain: the bouncing motion (in and out movement) helps to create a rate-dependent stress to produce a rate dependent strain, and allows saline irrigation to gently pressurize the bone walls. These together facilitate increased bone plasticity and bone expansion.
  • Increases Implant Stability: the densah bur technology facilitates ridge expansion with maintained alveolar ridge integrity and also allows for complete implant length placement in autogenous bone with adequate primary stability.

INDICATIONS OF OSSEODENSIFICATION

  • In cases with less than 3 mm of ridge width- It facilitates lateral ridge expansion.
  • In maxillary sinus autografting- It facilitates vertical ridge expansion

CONTRAINDICATIONS OF OSSEODENSIFICATION

  • OD does not work with cortical bone as cortical bone is a non dynamic tissue which lacks plasticity.
  • Densification of xenografts should be avoided because they behave biomechanically different than the bone tissue, as they have only inorganic content and they just provide the bulk without any viscoelasticity.

Comparison of osseous densification technique with standard drilling and extraction drilling techniques:

Clinical figure

CONCLUSION

  • OD is a specialized procedure for osteotomy preparation that is inherently bone preserving. Unlike conventional osteotomy, it uses specialized high-speed densifying burs. Osseous densification technique would increase primary stability, bone mineral density, and the percentage of bone at the implant surface compared with conventional drilling technique.
  • Osseous densification was shown to increase the insertion and removal torques of the implants compared to standard drilling and extraction drilling. The bone mineral density of the osseous densification sites were increased by both compaction and autografting bone along the periphery and at the apex of the osteotomies
  • By preserving the bone bulk with the osseous densification technique, it is hypothesized that the healing process will be enhanced due to the autografted bone matrix, cells, and biochemicals along the osteotomy site.
  • It is ideal for patients with poor bone quality, providing good primary implant stability.

REFERENCES

  • Seeman E. Bone quality: the material and structural basis of bone strength. J Bone Miner Metab. 2008;26(1):01-08.
  • Huwais S. 2013. Fluted Osteotome and Surgical Method for Use. US2013/ 0004918. U.P.A.
  • Huwais S. 2014. Autografting Osteotome. World Intellectual Property Organization Publication, Geneva, Switzerland.
  • Podaropoulos L. Increasing the stability of dental implants: the concept of osseodensification. Balk J Dent Med. 2017;133-140.
  • Caulier H, Naert I, Kalk W, Jansen JA. The relationship of some histologic parameters, radiographic evaluations, and Periotest measurements of oral implants: an experimental animal study. Int J Oral Maxillofac Implants 1997;12:380-86.

Disclaimer from Guident

The views and opinions expressed in articles published in Guident are solely those of the authors and do not necessarily reflect the views of the editors, the editorial board or the publisher, Ivory India. Guident does not endorse any product, technique or treatment described. Clinical content is intended for qualified dental and medical professionals and is not a substitute for individual clinical judgement. Guident, its editors and the publisher accept no liability for any consequence arising from the use of information published in the journal.

How to cite this article

Dr. Bisma Reyaz, Dr. C. Pradeep, Dr. Manesh Lahori. An Answer to Thin Alveolar Bone: Osseodensification. Guident. 2020 Aug;13(9). Available from: https://ivoryindia.in/articles/implantology/an-answer-to-thin-alveolar-bone-osseodensification.html

Related articles

More in Implantology

All 224 articles
Vol. 13, Issue 11 · October 2020

Indirect Sinus Lift-an Insight

The indirect sinus lift is a procedure to lift the augment/regenerate alveolar bone in atrophied residual maxillary posterior alveolar crest . The posterior maxilla is always considered as…

Dr. Vidhya. T. K

Vol. 13, Issue 3 · February 2020

Implant Treatment in Esthetic Zone

Placement of implants in anterior aesthetic zone and to restore them remains a difficult area of implant dentistry. This may be attributed to the bone resorption that usually occurs after…

Dr. Abhishek Sharma

Call for papers

Publish your clinical work in Guident

Original research, case reports and review articles are welcomed from clinicians and researchers worldwide. Every submission is assessed by the editorial board.