Open AccessPeer ReviewedPublished Monthly Since 2007 Vol. 19, Issue 12 · November 2026Media Kitinfo@guident.net

Tad : A New Vista in Orthodontics

  • Dr. Varun Abrol ABROL DENTAL CAREConsultant
  • Dr. Karan Abrol Govt. Dental CollegeP.G Student

patiala, punjab, Patiala, Punjab

Guident · Volume 11, Issue 9 (August 2018)Published August 20189 min read

ABSTRACT

IMPORTANCE: Orthodontist has always made efforts to discover a device to provide absolute anchorage and success was achived with arrival of these biocompatible devices in orthodontic practice to control tooth movement.

OBSERVATIONS: These screw-like gadgets are becoming popular because they provide absolute anchorage.The final goal of orthodontist is to achieve desired tooth movement along with better esthetics of patients.

CONCLUSION: This recent treatment approach is causing a ideal shift in orthodontic treatment planning. As number of patients demanding implant has been increasing there has been vast deal of research exploring the use of mini- implant.

KEYWORDS:
Mini-screw,Orthodontics,Anchorage,Temporary anchorage devices,Esthetics

INTRODUCTION

Ocasionally, orthodontists have been using intraoral as well as extraoral appliances, to control anchorage.It has been matter of concern for long time in orthodontics to achieve well planned control of anchorage. A temporary anchorage device (TAD) is a device which is temporarily fixed to bone for the purpose of enhancing orthodontic anchorage either by supporting the teeth of the reactive unit(indirect anchorage) or by eliminating the need for the reactive unit altogether(direct anchorage). For long time, orthodontist have dreamt of a device which could provide absolute anchorage .They achived success with arrival of TAD in orthodontics to control tooth movement. New discovery dawned in 'Anchorage paradigms' with wider application of implants in orthodontics and has revolutionized field of orthodontics.

Mini-screw implants as shown in Figure1, often referred to as temporary anchorage devices (TADs), are small titanium alloy or stainless steel surgical bone screws placed into either buccal or palatal alveolar bone. TAD offers fixed anchorage and are easily placed immediately. Their success rate is depended on the system used, the operator (technique and experience), and the patient (multiple factors).Currently, these mini-implants are manufactured internationally by a number of commercial companies with variations in length of 5–12 mm, diameter of 1.2–2.0 mm.

Absolute anchorage is provided by mini – implants with minimal need of patient compliance. Use of TAD for the maximum anchorage is possible with the reduced unwanted side-effects16.

Mini-screws are also known as TAD’S Temporary Anchorage Device or Micro-implants or Ortho-implant. With use of TAD less of efforts & time is spent on planning for the anchorage needs. The final goal in orthodontics treatment is to achieve desired tooth movement along with better patients aesthetics. Mini –screw provide more predictable and stable results.

HISTORY

Since long time the evolution of temporary anchorage devices has been occurring based on experiences with interdisciplinary dentistry. In 1945, Gainsforth and Higley3 used implants to achive orthodontic anchorage for retraction of upper canines in dogs by using Vitallium screws & SS wires in the ramus area of the mandible. This is considered to be the first published case of an implant for orthodontic anchorage. In 1964, Branemark and coworkers reported on the use of titanium optical chambers implanted into the femurs of rabbits for studying bone marrow microscopically. Result shown no side effect with titanium implants and secure anchorage. Branemark5,6 & colleagues in 1969 introduced the concept of osseointegration in dentistry, using pure titanium implants. The success thus resulted in material development, less invasive surgical procedure in which implants were loaded. In 1970, Leonard Linkow made replacement of missing molar with mini – implant.8. In case report he described use of endosseous blade implant to anchor rubber bands which was used to retract maxillary anterior teeth.

In 1984, Robert & fellow researchers collaborated the findings of Branemark in an extensive study of titanium implants in rabbits.

Costa and colleagues in1998 used 2 mm titanium miniscrews for orthodontic anchorage.

In 1988, Creekmore used Vitallium implant for anchorage for intruding upper anterior teeth17.

Kaomi introduced mini implant system in 1997. Maino et al, introduced spider screw system implant for skeletal anchorage. Kyu Rhim Chung developed C micro implant system.

Over long time numerous terms have been used to describe the orthodontic implant, such as miniscrews, mini-implant, microimplant & microscrew implant. Temporary anchorage device (TAD) is also widely used. Miniscrew implant as TAD seems to be the most unambiguous term. Implant has opened a new horizon to orthodontic treatment.

CLASSIFICATION OF IMPLANTS

Based on the location

Subperiosteal - Implant body overlying the bony ridge.

Transosseous-Implant body penetrates the alveolar bone completely

Endosseous- placed into alveolar bone -endosseous implants are used in most cases for orthodontic purposes.

Based on the form –

Solid

Hollow

Vented

Based on the spray of coating of hydroxyapatite or plasma sprayed titanium –

Coated

Non-coated

Based on the configuration design.

Root form implants: These are the screw type endosseous implants and the name has been derived due to their cylindrical structure

Blade / Plate implants:

  • -Skeletal anchorage implant
  • -Graz implant supported system
  • -Zygoma anchorage system

Screw design

  • -Orthosystem implant
  • -Straumann ortho implant
  • -Aarhus implant

According to the composition

  • BIOTOLERANT
  • Stainless steel
  • Cobalt-Chromium-Molybdenum(Co-Cr-Mo)

BIOINERT

Titanium

  • -Alpha
  • -Beta
  • -Alpha beta phase
  • -Ti 6Al-4V

BIOACTIVE

  • Ceramic Implants
  • BIORESORBABLE
  • Polylactide
  • According to the surface structure.
  • Threaded or Non-threaded
  • Porous or Non Porous
  • Further implants can be classified
  • According to March 2005 classification –
  • Biocompatible TADS
  • Biological TADS

PARTS OF IMPLANT

Miniscrews can be described as having four distinct yet contiguous segments or zones: BODY, COLLAR, NECK, and HEAD as shown in Figure 2

Mini screw is small and thin so it is easily placed in any part of alveolus for its required mechanical stabilization.

THE MOST COMMONLY USED SITES FOR THE PLACEMENT OF MINISCREWS IN MAXILLA AND MANDIBLE ARE –

(TAD COULD BE PLACED BOTH BUCCALY AND PALATALLY)

In Maxilla:

  • Infrazygomatic region
  • Between first permanent molar and second premolar
  • Between the first and second permanent molar
  • Between the two incisors
  • Maxillary tuberosity region
  • Mid palatal area
  • In Mandible:
  • Retromolar area
  • Between first permanent molar and second premolar
  • Between first and second permanent molar
  • Between two incisors
  • Between mandibular canine and premolar
  • Mandibular symphysis

The vital structures like inferior alveolar nerve, artery, vein, mental foramen, maxillary sinus and nasal cavity should be avoided.

To prevent accidental root contact the screws used for orthodontics anchorage purpose must be thin and tapered.

Diameter ranges from 1.2 mm to 1.6 mm for TAD.

For maxilla length should be 8mm to 10mm and for mandible length should be 6mm to 8mm of TAD.

IMPLANT AND ANCHORAGE

The endosteal implant were the first one to be used for the purpose of orthodontic anchorage. They provided adequate orthodontic anchorage, but they have limited application in terms of orthodontic use.

Another shortcoming was the waiting period which was nearly 3 – 4 months for the implant to integrate before they could be loaded.

Large size of implant and complications with surgical procedures were major problems.9

Non – osseointegrated mini implants used in orthodontics have overcome major problems & complications and also they were mechanically stabilized cortical implant. These are removed soon after treatment.Light forces act on TAD. Osseous surface is more stable than fibrous surface for mini-implant. The screw that was 2mm or more wide are termed mini screws and those that were less than 2mm wide are termed as micro screws.

INDICATIONS AND CONTRAINDICATIONS OF IMPLANTS

INDICATIONS

1.INTRUSION/EXTRUSION TEETH

2.CLOSE EDENTULOUS SPACES

3. REPOSITION MALPOSED TOOTH

4.REINFORCE ANCHORAGE

5.PARTIAL EDENTULISM

6.ORTHOPEDIC MOVEMENT

7.INSUFFICIENT NUMBER OF TEETH

8.ASYMMETRIC TOOTH MOVEMENTS

9.MESIAL MOVEMENT OF MOLARS

10.PROCLINATION OF ANTERIOR TEETH

CONTRAINDICATION FOR IMPLANT

1. SEVERE SYSTEMIC DISORDER

2. PSYCHIATRIC DISEASES

3. ALCOHOLICS DRUG ABUSERS

4. INSUFFICIENT VOLUME OF BONE

5. POOR BONE QUALITY

6. PATIENTS UNDERGOING RADIATION THERAPY

7. INSULIN DEPENDENT DIABETES

8. HEAVY SMOKERS

9. PATIENTS WHO ARE SUFFERING FROM METABOLIC BONE DISEASES

10. ACUTE INFECTIONS

The method of insertion of a screw into the bone depends upon the type of screw chosen. There are two different types of screws available –

Self tapping Self drilling: A tunnel is drilled first with pilot drill then implant is inserted.

Pre – drilling Drilling free:Implant itself act as drill during insertion.

LOADING OF IMPLANT

  1. IOPA with surgical guide
  2. Anesthesia
  3. Aseptic preparation
  4. Surgical incission
  5. Drilling – loading of the selected micro screw into the long handle driver is done, and then screw is inserted at the registration point. Insertion is done at angulation of 30 -degree to 40- degree in the maxilla and 10- degree to 20- degree in the mandible

HEALING

13-week healing period is required after insertint mini-implants. To prevent infection proper brushing must be followed as well as proper antibiotic therapy be given to prevent infection. Postoperative patient, visits are scheduled at 7 to 10 days and 10 weeks after insertion date stable mechanical retention or partial osseointegration is required and implants should not be overloaded during healing.

REMOVAL OF THE MINI-IMPLANTS

After the use of mini implant they could be easily removed with the long screw driver .The procedure can be done along with use of a local anaesthetic gel.

The removal site should be gently swabbed with a 0.2% Chlorhexidine. The wound present at time of screw removal is minimal and will close within a few days. Healing will continue in most cases.

COMPLICATIONS AND SIDE-EFFECTS:

  • Complaints of pain, abnormal sensations or palpability of the implant.
  • Material hypersensitivity of the patient
  • Air subcutaneous emphysema
  • Maxillary sinus perforation
  • Corrosion.
  • Peri-implantitis.
  • Trauma to PDL.
  • Loss of vitality of tooth
  • Increased reaction of the connective tissue in the area of the implant.
  • Nerve injury.
  • Inadequate bone formation, osteolysis, osteomyelitis, osteoporosis, inhibited revascularization or infection alignment
  • Breakage, bending, migration, or loosening of the implant.
  • Microscrew slippage.
  • Inadequate osseointegration that could result in loosening of the implant and failure of the orthodontic treatment.
  • Decreased bone density as a result of stress shielding.

CONCLUSION

This article was intended to highlight the use of mini implant but today further systematic and prospective research over use of TAD is required. The introduction of dental implants into dental treatment plans has had a tremendous impact on the field of dentistry. The routine use of TAD in orthodontic practice gives high predictability and scientifically proven benefits.The success of implants being used as anchors has widened the horizons of the orthodontists which should be explored to the best possible advantage for treating cases. Achieving absolute anchorage has been one of the dreams of the practicing orthodontists, and TAD have proved to be an effective and powerful tool for achieving anchorage. This recent innovation is causing a ideal shift in orthodontic treatment planning. TAD are powerful aid for orthodontic practitioner in resolving challenging malocclusions but implant failure might delay treatment time. New levels have been created in dentistry. "If one considers that this technology is still in its childhood, it becomes apparent that the future will bring many exciting and innovative developments in this area”.

REFRENCES

  1. L.B.Higley Anchorage in orthodontics. AJO-DO on CD ROM Vol 1996 June
  2. Samuels RH ,Willams F,Knox J, Jones ML. A national survey of orthodontic face-bow injuries in UK and Eire. Br. Dental J 1996;23:11 -20
  3. Gainsforth BL, Higley LB: A study of orthodontic anchorage possibility in basal bone, Am J Orthod 1945;31:406-417.
  4. Branemark P.L,Aspergren K, Breine U:Microcirculatory studies in man by high resolution vital microscopy.Angiology 1964, 15:329-332,1964.
  5. Adell R,Rockler B, Branemark PL A 15 year old study of osseointegrated implant in treatment of edentulous jaws.Int. J.Oral Surg; 1981;10:387-416
  6. Linkow L.I :The endosseous blade implant and its use in orthodontics.Int J.Orthod,1969,l 8:149-154 ,
  7. Chetan V Jayade ,V.P Jayde. implants as absolute orthodontic anchors part 1 JIOS 2003;36:214-219
  8. Lien-Hui Huang, a Jeffrey Lynn Shotwell, b and Horn-Lay Wang c,, Dental implants for orthodontic anchorage (Am J Orthod Dentofacial Orthod 2005;127:713-22)
  9. Dental Implants for Orthodontic Anchorage' (Huang L-H, Shotwell JL, and Wang H-L. Am J Orthod Dentofacial Orthop 2005; 127:713-22).
  10. Dr Pawan Gautam Prof. Ashima Valiaithan Manipal Indiathey
  11. Mr. Chetan.V Jayade & V.P.Jayde in 2003 in their articles implants as absolute orthodontic anchors' part1
  12. Chetan v. Jayade, V.P.Jayade .Implants as absolute orthodontic anchors part II —jios 2003;37: 48-53
  13. Lien-Hui Huang, a Jeffrey Lynn Shotwell, b and Hom-Lay Wang c, Dental implants for orthodontic anchorage (Am J Orthod Dentofacial Orthod 2005;127:713-22)
  14. Sebastian Baumgaertel,a Mohammad R. Razavi,b and Mark G. Hansc Mini-implant anchorage for the orthodontic practitioner (Am J Orthod Dentofacial Orthop 2008; 133:621-
  15. Proffit W. Mechanical principles in orthodontic force control. Proffit W, Fields HW, Contemporary Orthodontics. 2nd ed. Saint Louis: Mosby; 1993. p. 289-315.
  16. Samuel RHA, Jones ML. Orthodontic facebow injuries and safety equipment. Eur.J Orthod 1994;16:385- 394
  17. Creekmore TD, Eklund MK. The possibility of skeletal anchorage.J Clin Orthod 1983; 17:266-69.
  18. Poggioa PM, Incorvati C, Velo S, Carano A. ‘‘Safe Zones’’: A Guide for Miniscrew Positioning in the Maxillary and Mandibular Arch. Angle Orthod 2006; 76:191–197.

Disclaimer from Guident

The views and opinions expressed in articles published in Guident are solely those of the authors and do not necessarily reflect the views of the editors, the editorial board or the publisher, Ivory India. Guident does not endorse any product, technique or treatment described. Clinical content is intended for qualified dental and medical professionals and is not a substitute for individual clinical judgement. Guident, its editors and the publisher accept no liability for any consequence arising from the use of information published in the journal.

How to cite this article

Dr. Varun Abrol ABROL DENTAL CARE, Dr. Karan Abrol Govt. Dental College. Tad : A New Vista in Orthodontics. Guident. 2018 Aug;11(9). Available from: https://ivoryindia.in/articles/orthodontics/tad-a-new-vista-in-orthodontics.html

Related articles

More in Orthodontics

All 135 articles
Vol. 11, Issue 10 · September 2018

Introduction to Molar Distalization

In recent years, the percentage of patients having extraction as a part of orthodontic treatment has decreased considerably as experiments has shown that that extraction does not…

Dr. Shyamala Naidu

Vol. 11, Issue 11 · October 2018

Orthodontic Retainers

One of the most challenging phase for an orthodontist is to retain the corrections achieved during the course of orthodontic treatment. Retainers are passive orthodontic appliances that…

Dr. Shyamala Naidu

Call for papers

Publish your clinical work in Guident

Original research, case reports and review articles are welcomed from clinicians and researchers worldwide. Every submission is assessed by the editorial board.