Full Mouth Rehabilitation-Introduction, Diagnosis and Treatment Navigation: Part-5
MIK Dental, Mumbai, India
This article is a direct extract from the book by Dr. Moez Khakiani, titled Clinical Fixed Prosthodontics-Master Volume. It is a color atlas suited for clinicians who wish to expand their horizons in advanced prosthodontics. It has over 400, pages, and over 2500 color illustrations distributed over 25 chapters. It is a MUST-HAVE guide for clinical prosthodontics, including chapters like master level occlusion, full mouth rehabilitation, porcelain veneers, table top prostheses, implant dentistry, digital dentistry, etc.
Why don’t you give this book a try?
It is available for preview and purchase on www.mikdental.in, or you could connect on +91 9833400664 for the same.
2. RADIO-GRAPHIC EXAMINATION
As important is the evaluate of all the above mentioned aspects clinically, it is equally important to assess pertinent aspects on x-rays. This should be in the form of an OPG, along with use of IOPAs when required. In cases where implants are a part of the treatment plan, CBCT evaluation also needs to be included in the diagnostic phase itself. All radiographs should be evaluated for the following:
Bony assessment
This involves looking for any possible pathology within the bony structures of the stomatognathic system. It also includes evaluation of the bony profile and amount of support around every tooth.
Further, an assessment should be made regarding the density of bony trabeculae and the outline of the mandibular bone around the ante-gonial notch region.
Note: TMJoint health, anatomy and position should not be gauged on an OPG.
Dental assessment
This involves looking for carious lesions, secondary caries, marginal leakage around old prostheses, pulpal dimensions, wisdom tooth orientations, etc.
Periapical assessment
This involves looking for any possible periapical lesions that need immediate care.
3. MOUNTO-GRAPHIC EXAMINATION
No diagnostic evaluation for FMR cases can be deemed complete, unless diagnostic mounted casts are evaluated on a semi-adjustable articulator. These casts are to be mounted using a facebow and CR record, such that the arc of opening of the articulator mimics the physiologic arc of mandibular opening. I like to refer to this as the ‘mounto-graphic technique’, as changes in spatial relation of teeth can be visually assessed, analyzed and defined in a real-time manner. This allows us to assess two extremely important determinants:
Inter-arch relationship in CR
As explained in Master Level Occlusion, most individuals with attritional wear have occlusal interferences that perpetuate a hit and slide occlusion. Thus, patients who present for reconstruction have a discrepancy between their MIP and CR position. Judging a bite merely on the basis of how it looks at MIP may lead the diagnosis and treatment planning in a faulty direction.
Hence, evaluation of the patient’s bite should always be done in CR, as this allows for assessment of the true inter-arch relation, irrespective of tooth position.
For example:
- An edge-to-edge bite at MIP may result in an ideal anterior overlap relation at CR. Upward seating of the condyles causes posterior rotation of the mandible, which repositions the lower incisors downward and backward. In multiple cases, this provides the necessary restorative space for construction of the dentition without altering the vertical dimension.
- An anterior cross bite in MIP may result in an ideal anterior overlap relation at CR. These are referred to as ‘pseudo crossbites’, where an interference to the path of mandibular closure forces the jaw to close in a protruded position.
- On the other hand, a Class II malocclusion at MIP may deprogram to a more severe form of Class II at CR. These cases warrant bizarre anatomic modifications to be made along the maxillary palatal surfaces to produce stable stops and the desired anterior guidance.
Further details on the use of mounted casts for determination of the true inter-arch relationship are presented in the chapter titled ‘Centric Relation and its Registration’ and ‘Vertical Dimension and its Determination’.
Vertical dimension in occlusion (VDO)
Although it would be wonderful if we could quantify how much vertical has been lost, this has little clinical significance. Rather, a more critical evaluation involves determination of the amount of space required to restore the lost function and aesthetics.
As discussed earlier in this chapter, there are five methods to gain space when reconstructing dentitions that have suffered from a drop in VD. The first of which involves working in CR, as often deprogrammation of the mandible allows for the necessary room to be created for prosthetic reconstruction.
If the essentials of occlusal stability cannot be fulfilled at this dimension, orthodontic treatment or actual opening of the bite should be considered to create space.
Eventually, the decision towards the most appropriate VDO should always made on the basis of anterior teeth. The vertical dimension that allows anterior guidance and anterior aesthetics to be restored in the most predictable manner automatically becomes the VD of choice. This determination is best made on mounted diagnostic casts where a waxup can be performed to test the correctness of the decision.
Further details on the use of mounted casts for determining the ideal VDO are presented in the chapter ‘Vertical Dimension and its Determination’.
4. PHOTO-GRAPHIC, VIDEO-GRAPHIC DOCUMENTATION
Although not necessary, but highly recommended is a series of photographs made in accordance with the template designed by Dr. Mayur Davda for the purpose of self-evaluation, laboratory communication and medico-legal issues. Details of this are provided on page 267 of the Starter Volume.
Wherever possible, videos should additionally be made to record all aspects of dynamic lip movements, especially during phonation, as still camera images can sometimes miss capturing vital information.
What are the treatment alternatives for reconstruction cases?How should treatment plans be designed for FMR cases?
Cumulatively, all the above diagnostic data helps integrate the patient’s needs and desires, along with pertinent functional and biologic issues which allow for us to formulate the most effective treatment plan.
As important as occlusal harmony is to the total plan, it must be put into proper context. This is where, the ‘TREATMENT NAVIGATION APPROACH’ comes into the picture, according to which a series of questions can be usedto assess the most appropriate treatment alternative for the given set of problems.
In accordance with this approach, all identified issues should be addressed to gauge which of the following four treatment alternatives would provide the least invasive and most stable results. These options include:
- Reshaping, which involves additive and/or reductive equilibration,
- Repositioning, which involves using fixed or removable orthodontic appliance to move teeth,
- Restoring, which involves using partial or full coverage prostheses to reconstruct the dentition,
- Surgery, which involves using invasive procedures to reposition bony segments
In order to establish the role of each treatment alternative, the following standardized questions can be asked:
A. RESHAPING
Can this solve the problem?
Will it result in unacceptable mutilation of teeth?
Will it help partially achieve the desired result?
If indicated, reshaping can be attempted on mounted stone casts to verify correctness of the plan.
B. REPOSITIONING
Can orthodontic tooth movement resolve the problem?
Will it negatively hamper the neutral zone?
Will it help achieve the desired goal in combination with other treatment alternatives?.
If indicated, teeth can be moved on the mounted casts or 3D simulations can be used to establish validity of the plan. Consultation with an orthodontist is in order here.
C. RESTORING
Can prosthetic rehabilitation solve the problem?
Do teeth need restorations for other reasons?
Will it help achieve the desired goal in combination with other treatment alternatives?
If indicated, a wax-up can be performed to ensure the end result achieved is stable and in the patient’s best interest.
D. SURGERY
Can surgery resolve the problem?
Will it be more beneficial as compared to other options?
Will it help achieve the desired goal in combination with other treatment alternatives?
If indicated, model surgery or 3D analysis can be performed to gauge the final outcome. Consultation with an orthodontist and a maxillofacial surgeon is in order here.
For many occlusal problems, essentials of occlusal stability can be accomplished in more than one way. In such situations, each treatment approach must be analyzed on the basis of a key question, ‘Which is the best plan for achieving the essentials of occlusal stability, keeping longterm prognosis in mind and how does it fit the health, time and cost frame?’
Often, the most suitable plan involves a multi-disciplinary approach, e.g. orthodontics to improve anterior tooth position and arch alignment, followed by prosthetic reconstruction to improve aesthetics and functionality of the dentition.
In this manner, the ‘Treatment Navigation Approach’ serves as an excellent guide for directing one’s thought process in an orderly sequence of decision making. Such an approach ensures optimum utilization of time and improves results, while also countering the fear of failure that often lures at the back of our conscience.
What should be done with 3rd molars when treating full mouth cases?
3rd molars are today recognized as vestigial organs that serve no functional purpose. Besides, these teeth can be the cause for interferences, especially if left without an antagonist. Note: If these teeth are retained, they need to be restored. This adds to the complexity and cost of treatment. Hence, unless a 3rd molar serves as a viable abutment for a missing molar tooth, common sense lies in extracting them all.
CONCLUSION
When dealing with full mouth dentistry, cases should always be approached with a ‘patient first’ attitude, which recognizes that almost every occlusal problem is a progressive one. Accordingly, every patient should be examined and communicated with, from a periodontal, functional, biomechanical and dentofacial perspective, with a clear understanding of every problem that needs to be treated in a timely manner.
Remember, the first step in setting up any treatment plan lies in diagnosing the problems. Every individual problem must be clearly defined and this requires thoroughness in the examination stage.
No final decisions should be made until mounted casts are studied to analyze all treatment possibilities using the ‘Treatment Navigation Approach’, to determine which plan would be in the best interest of the patient.
A logical sequence of approach:- List each problem,
- Evaluate all treatment options to overcome the problems,
- Determine the best solution,
- Objectively visualize the end result using mounted casts, wax-ups and test drives,
- Design a step-by-step protocol for implementation of the plan in an orderly manner,
- Finally execute each step exactly as planned.
Occlusal reconstructions would lack predictability, unless the preciseness of the system is understood and the skills for rehabilitating bites developed.
So let’s take this discussion into understanding the use of semiadjustable articulators and steps for mounting complex cases using facebow and CR records.
Disclaimer from Guident
The views and opinions expressed in articles published in Guident are solely those of the authors and do not necessarily reflect the views of the editors, the editorial board or the publisher, Ivory India. Guident does not endorse any product, technique or treatment described. Clinical content is intended for qualified dental and medical professionals and is not a substitute for individual clinical judgement. Guident, its editors and the publisher accept no liability for any consequence arising from the use of information published in the journal.
How to cite this article
Dr. Moez I. Khakiani. Full Mouth Rehabilitation-Introduction, Diagnosis and Treatment Navigation: Part-5. Guident. 2022 Oct;15(11-12). Available from: https://ivoryindia.in/articles/prosthodontics/full-mouth-rehabilitation-introduction-diagnosis-and-treatment-navigation-part-5.html







